Blog

Posted on

Apply Silicone Real Sex Doll Sealant

Please help. So does acetone melt the silicone, then cold weld the scars together, and then wear the sealant? Scars are thinner, so should I use a toothpick before applying acetone? Shouldn’t the sealant be too obvious once it is dry? I also added a photo to the original post. Acetone only cleans silicone and degreases it. But this is necessary before applying silicone real sex doll sealant.

It is difficult to repair such invisible scratches. Make sure to use as little silicone sealant as possible. You can also try using hexane instead of acetone. You can also dilute the silicone gum with hexane to make it softer (this applies to one-component silicone gum; please try before applying it to dolls). Let me guess it is a 100 cm doll from Aliexpress. I encountered the same problem today. I was able to rearrange my 165 cm doll because she did n’t tear. I still want to make a topic on it. If you take a look, it will also help you.

I don’t fix white fever is like charm no, she is 158 years old, and I won’t mention the manufacturer or distributor, because this is not the result of the quality of the doll. Sadly I am responsible for this. It was indeed unhealthy for her to be split too often. However, I’m not so sure about this, and I think using too much petroleum jelly inserts will greatly soften the TPE in this area, causing it to tear and rupture real sex dolls faster, even faster than it is done.

Posted on

Usage And How Often You Bend Real Sex Dolls

Owned her since October 2017. As soft as her arrival, without any damage. I think they do stain easily, so either don’t wear any dark clothes on them or wash them off. Wash and dust the doll the first time you get it … grease for at least 3 to 4 months. Depending on your usage and how often you bend the real sex doll, it will determine your cleaning, oiling and powdering cycle.

This is one thing that is different for everyone. Keep in mind that most dolls deflate a little bit, which means that the oil will seep into the doll’s surface for a while, which means you may find very light oil spots on her or her linen clothes, which Is normal. Another thing is that you don’t wear dark clothes until you have washed the doll several times to get the mold out of the material.

If you do decide to dress the doll in dark clothes, it is best to just let her wear this color for about 6 to 8 hours, and then dress her with light clothes. Does anyone know how to remove the tiny scratches on the silicone skin? After a period of dress up, a scratch appeared on the shoulder of my brand new Sanhui silicone doll. Very noticeable after powdering. Guess there must be some common real sex dolls remedies for these things? She is too new.

Posted on

Pressure Site Treatment Real Sex Dolls

Depending on the TPE and the manufacturer, I would use a medium temperature of 140 to 170 ° C. (Note: I’m not sure if the display on the soldering station is correct, I always try to set it on the test piece first.) But this time the TPE real sex doll should melt safely, not just on the surface. So, due to the larger surface of the tool, this time I set the temperature to 250 ° C.

The test piece immediately became liquid but did not burn. How bad is the idea of ​​making a paste with some acetone and tpe pieces and smearing it in to try to seal the holes? Stand as if pasted in a paste, then lean a small diameter stone or glass noodle stick against it to secure it in place. Hey, I have a doll and I ordered to go home as soon as possible. I want to know if I should oil the doll or wait for several months when I first get it, and how often do I need to oil it.

I used to have four tpe dolls, but I think some have fueled a lot of people and some are not enough. Is it once a month or once every two months? When I first received her, I thought she was a newcomer. Do I still need oil now? I waited for a month before my initial baby oil treatment on my WM, and after that every 3-4 months. Occasionally, real-life dolls are treated with petroleum jelly for stress areas. Seems good to me.

Posted on

Did Not Deliberately Make The Ankle Of The Real Sex Doll

I think you have a final decision on this particular issue. If my car fails after 200 miles, the dealer will repair the car instead of replacing it … a fair compromise. But we need to discuss what you suggested in the first article. I want to discuss guarantees, and I hope that many real sex doll suppliers will join in.

I still hope that someone in the UK can fix this. As I said in the OP, the internal structure still exists, and if she can be reunited from inside to outside in some way, she may return to normal. When it comes to this particular industry, it’s clear that there isn’t much to do with regard to consumer rights, which is something that many doll owners have to deal with. In my opinion, this is a very serious problem. I think your quarry is reasonable, but it won’t surprise me because they cause you trouble. This has become a familiar practice among many of these manufacturers.

Of course, this is just my opinion. Thanks for your comments so far. I believe the forum can help me solve this problem. So, in short, the vendor is very firm in recommending his competitor to replace my first doll because of a bad neck. Now, because the ankle he sold to me broke, not the neck of the real sex dolls, he didn’t need to replace it.

Posted on

Very Custom Real Sex Dolls On Order

To break it down. Is there a major difference between a defective ankle or a defective neck? Or is the defect a defect? Two people admitted that their ankles were soft (you were three years old) and two others (I was one), and we both knew what we did wrong. Indeed, you may be doing something unknowingly rather than deliberately causing a real sex doll‘s ankle to do so.

You just don’t remember. You can ship her to me and I will repair her. You have fun with your girl on her back …. you need to support her head with a pillow. Are you happy with your girl, she is on your thigh, and you and her head face continue to fall . I’m personally in a similar situation, and needless to say, it really makes me discouraged.

Having said that, it means that he will fix the problem and even pay for the shipping, you can’t be better, for me it is he who takes care of you. Is a good supplier, and I’m sure that frustration and poor communication along the way can lead to this misunderstanding. I have to look back. I typed a long thing, but I lost it. No venting .. Seeking a third party … like arbitration. It’s frustrating. Don’t explode anyone here. Outstanding on very custom real sex dolls orders.

Posted on

Figure Out How To Heat Seal Sex Dolls

Any ideas that would help your question, but be sure to know how you would manage to seal it up (end result) … consider maybe one day (along the seams) to raise my own girl’s leg up, but mainly It’s “frightened” It’s hard to get back to the right state again. Thinking about stuffing and stitching almost makes me feel like I’m dealing with stuffing sex doll. I don’t care if my doll comes out of here, there is a nasty body Scars and fluffy legs.

I just can’t use her one leg to be heavy and loose. If I could lose weight, but she still had leg-like things at her tail, I would call it victory. For her, losing weight will not be the worst thing in the world. I cut my foot from the sole of the foot, moved it up, and managed to remove the bone. The broken part was at the weld before the hip joint, so once I cut the tape, it slipped out.

In addition to wounds on the soles of the feet and seams, TPE skin is also okay. I was able to cut the tape on my feet and knees without poking outside. Now, I just need to fill something inside to keep its shape, or tie a ribbon around it to keep the legs closed, or figure out how to heat-sex sex dolls. Still, I’m happy that at least heavy metals can be removed.

Posted on

Trim It To The Desired Comfort Sex Dolls

If anyone can answer, I have two questions. One is whether I should avoid certain types of filling (polyester will react with TPE? Cotton). Also, I’m not sure how to seal the sex doll skin once the metal is removed. TPE glue sounds difficult to use, and I’m not sure if I want to risk hot smoke.

Can I stitch it up or pass the thread through the TPE? I eventually removed my leg myself. The mistake I made was that I might be able to fix her, so I cut creases in my hips and legs. In the long run, this is a wrong decision. Attempting to use her as a one-leg torso doll, when I used her, I could feel the metal on her hips.

If you decide to amputate, I suggest you do a little amputation on her thigh and then slide the leg out. The top of the “femur” should be able to slide out easily, leaving a stump which can then be trimmed to the desired comfort. One foot can deflect the body, but it’s much easier to move around. Get good and evil. We hope your sex dolls supplier can serve you.

Posted on

At Least I Can Pick Up Sex Dolls Again

To answer your other questions, it is not difficult to remove the TPE sex doll from the skeleton. The bottom of the foot was most damaged because I needed to cut it open to remove standing foot metal, but for the rest of the leg, this was just a progressive cut along the seam. Once I cut the tape at the knee joint, peeled it off and cut the TPE from the drill bit stuck to the metal until it was completely separated, it was simple.

I would open the hips and tie the metal back with a metal zipper to keep her legs soft but still workable. I just sealed it up and used the video on YouTube-using heatgun and metal pieces .. feasible and sure. Thanks for the information you provided, I haven’t realized that there will be tape and TPE / metal bonding to make it so difficult.

However, if my supplier cannot fix the replacement body, I might try to see if it is possible to cut the TPE around the tape / metal without puncturing the surface. Even if it causes external damage, it is better than a completely loose leg. I think in this regard, even a complete amputation of the leg is better than my current situation. I have to make sure that no water comes in from the open stump, but at least I can pick up sex dolls again.

Posted on

Try Removing TPE Sex Dolls On Your Feet

At some points, mostly where there is a joint, there is a material bonded to the tpe. I am currently trying to remove tpe from the girl’s feet, which is a huge pain and does not cause skin damage on the outside. I cut the tpe sex doll above my ankle and started the removal process. I tried several hip fixations before deciding to fix some parts, but unfortunately it didn’t work.

I feel you are in pain and hope to solve it for you. The mine was not purchased from an approved supplier. I hope that approved vendors can do more for you. In my opinion, limbs that brake during that time indicate poor bone manufacturing. Maybe we should ask for skull photos and finished doll photos from the factory.

In fact, I cut off most of the doll’s legs. Fluffy legs are entangled as hard to carry as heavy legs. I haven’t tried to seal the rest. I was actually trying to remove the TPE sex dolls on my feet without breaking or cutting it. What makes it so painful! I’m glad you were able to get the job you need easier than I am trying.

Posted on

Some Parts Are Easily Exposed To Sex Dolls Metal

I’m afraid there will still be something missing that will prevent it from working, so I think I should ask more knowledge experts. Is it feasible / a good idea to remove the metal skeleton from a hip fractured leg? I’ve contacted my sex doll vendor and I’m waiting to fix this, but I didn’t expect anything. In the meantime, I have been brainstorming about bone removal. It is difficult to remove bones like the legs.

It is absolutely difficult to bond TPE to metal and then remove it from the metal. I have done this many times, but this is to separate the doll from the torso, but I know that the legs are usually impossible and the toes are simply impossible without destroying the doll. I have tried welding joints but there is no solution because the oil has contaminated the metal and flux cored welding does not last very long.

I am afraid that these broken parts are actually ends and cannot be completed. After 7 weeks of use, I had the same experience on dolls. About the inability to remove the skeletal leg is absolutely correct. At least on my doll, some parts can easily expose the sex dolls metal, leading people to think you can slide the metal out. Unfortunately, this is not the case.