Blog

Posted on

Is There Any Way To Solve This Sex Dolls Problem

In a few days, blunt needles may be the number one seller on Amazon, haha. The needle is: “1ml syringe with 23Ga 1.5 inch syringe and plastic needle with cap”. The name is really dazzling. The needle is indeed stainless steel. I always put obstacles between myself. I will not risk long-term contact with any polystyrene materials with TPE sex doll.

As for the wire issue, you will have to open her door to see if it is the pipe or pole skeleton system in use, and determine if it is decided to go this route, it will suit your doll. I received my 6Ye 164D today. She is a beautiful doll, and I have no regrets for the goods I bought.

However, there is some wear and tear on the c-section area out of the box. And I think it could be made worse by putting in a removable vagina. Although this is not a big problem for me, I wonder if there is any way to solve this sex dolls problem? The rest of the body is silky silky, and the crochet area (vagina and hips) is the only part. I apologize for the poor image quality.

Posted on

Want To Reduce The Time That Dyes Penetrate Into Sex Dolls

My 100 cm breasts are a little jerky, so I put 1 ml of nipples directly into a nipple, and I will do it several times throughout the day, maybe we can also rejuvenate them in this way. I had to deal with it, and even after her one-month rotation, she was still bland. My guess is that she was sitting in the warehouse for a long time before I got the sex doll, so I was spinning her every day and rubbing it to try to fix it.

Any ideas or suggestions? She is a doll. The head is everything, except for blue eyes and different hair. Wig linings are usually dark colored wigs. Either use a wig cap that is not black / dark, or choose a better wig.

I had the same problem with my BJD and its vinyl. I always wash my new wig, and if you want to reduce the time that dyes penetrate into sex dolls, you should probably do the same. Don’t be discouraged, just make this a better course for yourself.

Posted on

Breasts Look Bigger Sex Dolls

Is that wig a doll? My doll has a lot of wigs, but all of the sex doll‘s wigs are light-colored inside. The inside of artificial wigs is usually black and will stain the doll’s head. I just bought a doll and the same problem occurred with the wig. This is also a very good wig.

Strangely, the entire wig cap was black, but it was simply the elastic belt that caused the problem. I just stopped using the straps and instead used a hair band to secure the wig to her head. It also happened to my doll. I am very sorry to see this. Although I am not that bad, I have encountered similar problems, including one wig.

Time will eliminate most of the discoloration. Usually, you can prevent this contamination by sewing a wig cap inside the wig so that the band does not come in direct contact with the doll, but this is too bad and I will get another wig. Fortunately, I cleaned them again with a detergent. The jet lag of our sex dolls. The breasts in this photo look bigger, but this is just the appearance and the same size.

Posted on

The Ultimate Real Sex Dolls Material To Try

Then start again. I think you have the right idea of ​​shredding and melting the tpe real sex doll! But this time it is very tiny, so you can use a hot air gun to melt the debris quickly like in the video. Then, as shown in the video, after briefly heating the dicing / cavity, sc up and transfer it to the dicing area using a stainless steel spoon finder. You can then use one of the “trowel / knife” tools.

I think you are trying to fill a lot of gaps as quickly as possible with the tools and methods you use. By using these types of tools, you can build layers more evenly. By processing tiny blocks, a better uniform fill will be created. Larger blocks fill the gap faster, but you end up trying to use too much real sex dolls, so you get tiny areas that don’t fully adhere to the surrounding layers.

But take a moment. I will give up the current course here. A soldering iron has been ineffective at performing this repair. The original repair shown in the previous post was not good enough, and I messed up her armpit. I tried to fill her armpit with the TPE test piece provided by the supplier, and it seemed difficult to make everything work. To me, the pressure in the underarm area is too great.

Posted on

Have You Given Up On This Real Sex Dolls Project

I can’t navigate the repair kit without errors, so I assume it’s out of stock. Any further suggestions are appreciated. I am going to throw away the towel. Today, I’ve done some welding work on her armpits, but the results did not excite me. I closed her armpit as much as possible to reduce the pressure, then pushed the iron into her armpit and started sliding the needle tip left and right to melt the TPE real sex doll.

After waiting for about an hour, and the latest article I published in the thread, I went back to the room to look at her armpit again, and it actually looked more promising than any photos shared in the thread. All I need to do now is make sure the tip is deep enough to avoid getting the effect of Swiss cheese.

I don’t know if you have given up all hope for this real sex dolls project, but maybe you can try to change your technology and add some tools to help you get better results? Read it carefully, and it seems that you can complete all the published tasks with only a soldering iron blade! ? Great, I want to say you can only do so much with one tool! If you are not satisfied, try fewer Swiss cheeses.

Posted on

Adhesives Not Recommended For This Repair Real Sex Dolls

But I’m not sure what would I think if the maintenance staff saw a guy in a half-shirt with this when they came to my apartment? For my soldering iron, I chose this based on price and accessories. As someone who doesn’t use a soldering iron, this can easily be caught. If you are working on a TPE real sex doll, use a blade attachment. Sculpting is much easier, and an increase in surface area may make things faster.

But take a moment. I will give up the current course here. A soldering iron has been ineffective at performing this repair. The original repair shown in the previous post was not good enough, and I messed up her armpit. I tried to fill her armpit with the TPE test piece provided by the supplier, and it seemed difficult to make everything work. To me, the pressure in the underarm area is too great.

I tried RLSD’s TPE glue, and although it did play a role, the results for the armpit area were not satisfactory. This was a huge failure and I was reluctant to continue using the existing tools. It can be repaired, but it is not in my support right now. I really don’t want to risk using Loctite glue, or recommend any adhesive not recommended for this repair of real sex dolls.

Posted on

I’m Not Sure About Contacting TPE Real Sex Dolls

But it seems that it has been waiting for at least a week since the first repairs were made to cure the TPE and become more resilient, as mentioned earlier. I will not do any other work until I get this test piece, but at the same time, I will post some links and information to show you exactly what I am using for this repair real sex doll. Even with a respirator that only filters organic vapors, I still feel the consequences of inhaling toxic TPE fumes.

The effects of the smoke on me were short-term memory loss, difficulty breathing, difficulty falling asleep and redness in my throat. After working with tears in a poorly ventilated area for about 40-50 minutes, it lasts about a week and a half. I live in an apartment, so there is no well-ventilated place. I did this in the bathroom with the exhaust fan turned on, then ran the shower, hoping to bind the TPE particles to the steam.

If you, like me, don’t have a well-ventilated work space, buy this mask for repair. As of now, this gas mask is priced at $ 31 on Amazon. I am not sure what the long-term effects of exposure to TPE real sex dolls smoke are, but the short-term effects are enough to make me uncomfortable at work. Honestly, the mask itself looks great.

Posted on

Waiting For TPE Real Sex Dolls From The Supplier

Still waiting for feedback from suppliers of TPE test pieces. I think you handled it well! Be patient, it looks much better than originally thought! I’ve been waiting for a week for the TPE to cure, and it seems to be better than it was a few days ago. I also contact the vendors who are testing TPE, so I still have to wait for some time to finish the real sex doll job. This is an impressive job.

Before that, I had to deal with a tear in the armpit, and all I used was, but all you had to do was a plastic surgeon. You can hardly tell from the last picture! Can’t wait to see the work done. Either way, I believe that others will find this feature useful, and seeing how you do it, it seems impossible, I really appreciate it!

I do n’t have experience with a soldering iron, so doing this work is quite daunting, especially when trying to use a hot air gun in advance will make the situation 5 times worse. I just make sure to search these forums to fix high stress areas. I haven’t been able to do any tearing work for about two weeks, and I’m still waiting to get a TPE real sex dolls test piece from the vendor.

Posted on

To Make All TPE Real Sex Dolls Flow To The Deepest

I made sure that she was positioned in such a way that I didn’t have to move my arm’s position before waiting for time to heal for at least 24 hours (or longer), and then had time to do more. When I fill my tears, I will do my best to be as cautious and patient as possible. In order to begin to shed tears, I had to open my real sex doll arm a little more. With the tip of a soldering iron, make sure that I melted the debris removed from the neck and gently brushed the inside of the tears so that the debris on the neck could be fully bonded.

I decided to close my arm in most cases so that I could see any anomalies. Indeed, I was able to capture and eliminate foam, which was disturbing because I wanted things to be airtight, but maybe my expectations were too high, and a few hours later, I tested the elasticity of the patchwork. It doesn’t seem to be that strong … as I suspect.

There are simply too many airbags that can’t hold everything together firmly, but I believe it can be solved. I may need to go there again, but I really don’t want to take any TPE from my neck anymore. I don’t even need it, but to make all TPE real sex dolls flow to the deepest to ensure that everything is solid will be very challenging and time consuming. Although not discouraged. I was thinking that I would have to reprocess all the TPE that fell off my neck.

Posted on

I Will Not Try To Overuse Real Sex Dolls Today

When I recovered the excess tpe from the neck of the real sex doll, I cut a pair of skates near the top of the neck tube, so I did not touch the outer area. The challenge now is to get her in a good position to start processing TPE parts because my doll doesn’t have a flat elevated surface to place. Maybe I can put things together. Everything looks good, remember to slow down and keep talking for a few days.

When I first tried it, I was tempted to move on because I could see it running, but it would be best to do it for a while and then leave it for a while, it seemed like a viable approach. Looking again at the tearing of the armpit, I may get enough TPE from my neck, but I need to take it carefully to avoid damaging my neck.

I’ve thought a lot about it, and it’s important not to be hasty. If I did something wrong, please correct me, but I assume that it may be important for TPE real sex dolls to heal for a while, even if your work is not too far away. I won’t try to overuse it today, but at least try to fill the deepest part of my tears. I will update the thread with more pictures as soon as possible.