Blog

Posted on

Might Be Better For Larger Real Sex Dolls Areac

And I will avoid using hot air guns, because I am not sure it will not work even in the final smoothing. A larger flat tool (such as a heated spoon) may help smooth the area, but in the end it has nothing to do with appearance, but functionality and repair are crucial so it doesn’t get worse. I also have a real sex doll that needs repair-just like your arm.

But the degree of tearing is small, I will fix my problem this way, and I will get a repair video. I can’t believe this will attract your attention and Arthur’s attention! Here I did receive a test piece from Tan WM, which started to restore my confidence and I have been practicing the test piece in a “well-ventilated work area”. I’m using a knife tip and it takes some time to smooth it, so I know it will take a lot of time.

If the size of the attachment is three times the original, it may be better for larger real sex dolls areas, but I am willing to do this for a long time. I know it’s easy to smooth it with my hot air gun, but since everyone says the hot air gun is a bad idea, smoothing it will be a bigger task. It doesn’t seem impossible, it’s just tedious.

Posted on

Will Take Up A Lot Of Spare TPE Real Sex Dolls

I personally will avoid using tpe real sex doll padding. Don’t get me wrong, because it’s a convenient thing, and I’ve used it successfully before, but I think it’s best for areas that don’t stretch often. It also actively melts the surrounding tpe, so some skills are required to successfully use it. The solution I have to solve is to place her in the best position so that her armpits are facing up and then close her arms as much as possible.

However, it was still allowed to enter the axilla and gradually divided into small pieces using a variable welding station. You can always cut some pieces from the neck and that’s what I do when I do a groin repair. No matter what you decide, I wish you good luck! Soldering station is a good solution. Depending on the factors, the hot air gun will open her more / worse things, but I will first cut a small piece of TPE and then gradually fill it into the larger TPE by welding.

Yours can be repaired, but it will take up a lot of spare TPE real sex dolls, I will take it from the insert or her neck, or just order some spares. I’ll do the repairs like a few days, so you should take your time-do it every time, then take a break and continue. The final mixing will be performed using a solder gun.

Posted on

Let You Know My Real Sex Dolls Supplier

It gave me hope. I have been searching for armpit repairs on the real sex doll forum and Google since tears occurred, but the lack of detailed / complete armpit repairs makes me a little nervous. Currently, I am considering the following options: buy test pieces from experienced suppliers, cut into small pieces, and use a soldering iron for reprocessing.

Buying TPE Filler TPE Filler seems to be an easier route, but I want to do as much as possible with her skin tone, which is why I work with my supplier. I do have a suitable respirator, but the work area is not well ventilated. I live in an apartment and going out to the parking lot gets a lot of attention. My work area is my small bathroom, and whenever I do thermal work for girls, I shower in the highest shower cubicle.

The highest temperature at which steam can be combined with toxic particles may be desired. I’m not the sharpest tool in the shed, but when I take a hot shower at work, it always seems to be very different. I know the feeling of breathing toxic vapor, and the consequences are really uncomfortable. I will come back here to let you know what my real sex dolls supplier thinks about ordering test pieces.

Posted on

Your Repair Of Damaged Areas Real Sex Dolls

I know how you feel about doing the same thing a year ago, although the damage I caused was much more serious because I mistakenly heated and flattened my little groin tears and made it worse by using tpe filler The area of ​​a real sex doll. The good news is that I believe that this kind of damage can be repaired using the methods detailed in Mishka’s tpe repair thread.

For best results, I suggest you use a variable thermal welding station (buy my mine from eBay for £ 20) and then practice the technique used by Mishka, which works with small pieces of tpe as you gradually Work it into the damaged area and build a layer of tpe. If you look at this link, this is my personal experience.

I didn’t forget to make sure you do any such work in a well-ventilated place, and you will need proper masks to reach toxic fumes (3 million euros are affordable and available from many eBay sellers). Hope this helps and good luck! I’ve seen your thread several times, and the fixes you made to real sex dolls are not very noteworthy.

Posted on

Until We Find The Solution Real Sex Dolls

It’s a pity that only 2 weeks after taking it, she had so much tears under her armpit. Well, until I picked up the heat gun, it wasn’t that big (I shouldn’t do it …), now it’s almost as deep as the bone joints. I don’t need to worry about the tears in the armpits. I have owned another WM real sex doll for two years.

As if they changed the TPE mix, it was so ridiculous and less flexible than my first. I should know that using a hot air gun on one of the areas that may withstand the highest pressure is a bad idea, but I won’t give up. Here is what I have on hand: 1. Hot air gun (with infrared thermometer) 2. Cheap electric soldering iron set (with some accessories) 3. Available credit: | I am not a newbie, but this accident made me Be confident that you are a newbie.

By the way, I want to store real sesx dolls in my room all the way to the lower arm (for obvious reasons) until we find a solution. I don’t want to be one of those guys who sound desperate, but I really want to be transparent, even if this process takes me weeks to complete.

Posted on

Help You Add Stuff Tpe Sex Dolls

As others have mentioned, it is likely that the batch of tpe used on the sex doll has lost some of its ingredients and may cause premature aging. But I think you will notice that other areas, such as the armpits behind the knees, are also worn out. It seems to be limited to private use, so it reminds me that the chemicals you use to clean up are the culprits.

Vaseline / mineral oil itself is a poor promoter of bacterial growth, so just mixing light soap in water immediately after use and washing it occasionally is enough to prevent the risk of mold. I think people will continue to read the horror stories here, seeing past topics, freaking out, and then sometimes getting tidy. Just be thorough, but not necessarily heavy on the use of chemicals and hot water.

Just to give you some ideas on where to start fixing the work that has been done. You need to get a sample / spare tpe from the piper doll manufacturer, apparently having the same skin tone. You want to use tools. Therefore, as Arthur mentioned, it is a hot air rework station. I will also get a stainless steel sculpting kit like this to help you add filler tpe sex dolls and smooth the area.

Posted on

Add And Smooth Proficient Repairs Of TPE Sex Dolls

All in all, if I use Vaseline in small amounts, the TPE sex doll will heal over time, can I use TPE glue to repair the tear? Or am I forced to take the hot air gun route for repair? I can only speak and read English, but I think this is a bastard, and if I correctly guess the label, the label on the apricot may be more sour. I think most rinsing products are acidic and may erode TPE.

Women’s Health.gov quotes Most doctors advise women not to rinse. Exudation can change the necessary balance between vaginal flora (bacteria living in the vagina) and natural acidity in a healthy vagina. A healthy vagina has good and harmful bacteria. Bacterial balance helps maintain an acidic environment. I don’t think any application of anything will offset this damage.

Other than the skilled repair of adding and smoothing TPE sex dolls like a factory, I think this is hard to fix and maybe stabilizing it is the best option you want. Unfortunately, the damage has already been done. If you do not disturb you, you will need to perform repairs there or only repairs will be accepted. But move on and I will change your cleaning routine.

Posted on

I Always Wash Sex Dolls After Use

I notice that TPE sex doll often contain a certain amount of oil, and I want to make the doll’s skin flexible … Do you think any of your cleaning habits might use these possible results? Given its current fragility, I would not use baby oil in the area. Baby oil may make the area excessively soft, making it worse. I use vaseline there. And only a small amount is needed to wet the area.

Enough to make the surface look moist. Do not wipe on it. Given the current state of tpe, I would not use Nivea cream either. It contains water. TPE pouring out and already in a fragile state can cause mold. The strain zone (which looks like a cooked turkey) has more gaps for bacteria to enter.

And there is not enough oil in the pores; the water in Nivea Cream can be used by any remaining bacteria to make mold. Seen another doll owner using it on this forum, so I think it should be fine. I’m really not sure what the reason is because I always wash the entire body of sex dolls after use, but only the damage in that particular area … So far, my best guess is that if too much, baby powder Can the material be dried?

Posted on

Suggestions For More Experienced Sex Dolls Users

People with some experience can certainly do this, but if you haven’t used tpe sex doll at all, it definitely isn’t. Due to toxic fumes, etc., precautions must also be taken. I’m a newbie, so please think twice. I have never experienced this look on a doll before, but I want to know … When you clean the doll’s private area, do you use boiling water?

I remember mentioning in a tutorial that TPE can melt or slightly liquefy at 200 degrees Celsius … if you use boiling water above that temperature to clean private areas and then let it air dry, it may be really fast to heat and Cooling may be the cause of structural cracking.

Once again, you got more experienced sex dolls user suggestions before me, I just made a guess based on what I saw that looks like too dry, which may be caused by high temperature or rapid evaporation and material deterioration . Another thing to note-dishwashing soap (I know you only mentioned “mild soap”, so I’m not sure) and similar soaps tend to be “oil solvents” when mixed with water. This is the main idea used when washing dishes with a lot of grease or oil.

Posted on

I Will Be In Some Spare Tpe Sex Dolls

Lubricants and suds should be suspicious. Use baby oil to clean and maintain the correct condition. The soap will remove the oil and will quickly destroy her. These piper sex doll are fragile and need to cheer on privately. I agree that it is too early, but it seems to enjoy a high reputation, and I am very convinced that the problem lies in my daily maintenance.

I had previously sent an email to Kimi and he contacted the manufacturer and they suggested that I use a hot air gun to melt the rough surface of the TPE and stop using the existing soap. I’m not sure if I want to try this, I worry that I will eventually hurt her further because the damage is also inside the orifice. At the same time, I completely stop moving her to prevent further tearing.

Take a quick look, if you are sure you want to use hot air to reach the area, then I will not use a hot air gun, but instead use a variable hot hot air rework station with a thin nozzle. Even then, I am cautious because the area deforms under a certain amount of tension and it is easy to open when hot air is applied. Personally, I will do some exercises on some spare tpe sex dolls until you are proficient in the method.