Blog

Posted on

Use Caution With TPE Sex Dolls Solvents

If the quality is good, then the new sex doll will not be realized in a few weeks, sorry, this is just my personal opinion. I agree with Grimkins’ observation. All of this damage surrounds the play area, which should make you wonder why the type of lubricant used and how to clean it. You should post the lubricants and cleaning products you have been using.

Does the baby chemically react to your lubricants and / or cleaning products? That will be my first question. This is what I think. In my opinion, the lubricant or cleaner you are using is overly dry and / or reacts with TPE. I’ve seen damage like this (deterioration might be a better word), these old dolls have never been oiled or vaselined.

After just a few weeks, the doll will not look like this-makes me wonder if this is a bad TPE blend in the factory, maybe the plasticizer in the blend is insufficient. This is definitely not the result of overuse or forcibly opening the doll hole, I will contact the seller. Regardless of what you do, best wishes, but use TPE sex dolls solvents with caution, as other posters have said that doing so will make the problem worse rather than better.

Posted on

Looks Like TPE Sex Dolls Are Weak

You will need a glass dish to put tpe sex doll pieces in to melt them. Not recommended for any other use at a later time! You will also need a respirator for organic vapors / chemicals. To fill the hole area above the anal entrance hole, I will try to use a small stainless steel spoon inserted into the anal cavity and use it to prevent the filler added to the hole from falling out. It’s like punching holes in the wall with a sieve or grate on the screen.

After bonding the tpe to the surrounding area, you just need to slide the tool out. Does anyone know what I can do? It looks completely dry. TPE glue is actually a solvent and may make the situation worse. How long have you been with her and have you contacted your supplier? I have only spent about 2 weeks now and it is very new.

I’m sending an email to the vendor, but the more information the better. What should we do if tpe dries? And what causes this to happen? What do you use to clean her? Or what lubricant are you using? It just seems to be there, so I think this is something you use there. You can oil her with baby oil. It doesn’t look right. Looks like TPE sex dolls are weak.

Posted on

A Little Baby Oil To Clean My Sex Dolls Head

This was my first sex doll, so I realized that I would end up damaging her with not enough / too much maintenance, but it came too early and I am very anxious now. Today I noticed some strange marks around and in the hole. I don’t know what caused it or how to fix it. I think this will make the material more fragile because it is a bit broken now and I ordered some tpe glue and at the same time I want to learn more about what is happening here. I follow the classic tpe care: 1/5 Mild soap + water, dry with light pressure with microfiber tools, baby powder.

Also, be careful not to touch anything else. Wash your hands after application and dry on a towel. The next day, the towel was greatly bleached. That peroxide is powerful! guard against! There is no need for baby oil to clean the head unless you are skilled at redoing cosmetics, as essential oils remove the cosmetics used in the factory.

I only use a little baby oil on my cotton swabs to clean my sex dolls’ heads. Please be careful to avoid makeup that I want to keep and use it after a few months. When your girl arrives, be sure to clean your body, but your head should be fine. I should add that instead of having your doll go to the bath, you have to wash her with a sponge.

The risk of water entering undesired areas is too great. I put a few towels on the bed, and Jenny lay on it, then washed it gently. Hannah Doll is irresistibly beautiful-refresh my memory of her “brand and model”. Hadley has been looking for a wing girl at Christmas, and I think she became curious, because every time she saw this doll, her model fancied wrong.

Posted on

I Recently Bought Sex Dolls

Its diameter is about 1 to 2 mm and its depth is about 1 mm. There are many hands. Is there anything else I can do to prevent this? It’s weird, can you post pictures? Has she been exposed to any chemicals? The TPE repair thread discusses the use of heat to soften the TPE sex doll. This method may be better for chemical repairs, or it can be ignored if not too scary.

I patched the hole on her wrist with a hot air gun, but the fingers of the hot air gun were difficult to use, because it would melt more easily if not careful. That was dissolved by a chemical, just like my acetone experiment. You can steal some TPE from your neck like me and dissolve it in acetone to make a filler, but experiment first on a hidden spot or another TPE.

My method is to gently wipe the affected area with a soft cloth dipped in white alcohol, and then dry it overnight. This is a very good idea, and maybe a solvent can be applied with a makeup sponge or Q-tip. It is best to test in the neck first. I recently purchased sex dolls and it is in the best condition from the order. The company’s customer service quality is impeccable (thanks again!) And the delivery time is very fast (3 weeks).

Posted on

What To Do To Fix TPE Sex Dolls

It is best to notify the manufacturer for a recommended maintenance schedule. There are rumors that some new TPE sex doll should not be oiled like early TPEs. I also have a problem and I will receive my beautiful girl in a week or two. I want to know if I can wash it two or three times in a row and then apply the powder, or if I need to wash powder and do this multiple times.

Because many doll owners ask to do so to remove all chemical products. I did something similar the first time I got the doll. The next day after she arrived, I washed it once, and the next day. It was finally washed three more times on the same day that all the manure was dumped. Don’t give her powder until she is completely dry.

As for washing, I stood on a sponge with a plain rag and dipped a teaspoon of Dawn Dish Soap in a few quarts of warm water. This is really needed. I hope I can see something like this early when I first buy a doll. They are still healthy, but the makeup of the areola and vaginal area is gone. I want to know what can be done to fix the small holes in TPE sex dolls?

Posted on

Or Maybe The Formula Of TPE Sex Dolls Is Different

It might work for multiple applications, but I haven’t tried it. It’s no big deal for me, because I prefer sex doll black hair, and she is always black hair, I have some stains on my body and rubbed mineral oil on the spots a few times. I guess the mineral oil breaks them down and brings them inside, but it’s gone now. I must express my approval as a detergent.

Eva has been sitting in a red dress for too long, leaving terrible stains on her back, which obviously didn’t get enough time to be washed. Hopefully I’ve taken both before and after taking the picture, but when I first saw the stains couldn’t take the camera out, I was so angry. Interestingly, my 6ye doll has been wearing this dress for a much longer time and has not been soiled at all.

It may be because she is older and has less oil left, or maybe the formula of TPE sex dolls is different. Anyway, I usually paint the stained area in maximum intensity and leave it for about 48 hours. It dries and becomes crusty. Then I washed it with diluted dishwashing liquid / water and it worked very well. Basically the stain is gone. We will see here what happened, but the results impressed us.

Posted on

Not Sure If It Will Damage TPE Sex Dolls

I haven’t encountered it yet. I just wiped it, covered it with a fresh coat, then washed the sex doll with neutral soap, oiled the area and then powdered it. Washing clothes in salt water seems to lock color and prevent bleeding. I’ve been photographing my black and red outfits and playing without penalty. I will not leave these things for more than a few hours.

I haven’t finished all of these articles, but letting go, I have achieved amazing success with 5% benzoyl peroxide. I’ll put on some, and then you just need to leave it and apply it for about three more days a day, then the stain completely disappears! However, after that I recommend using a good quality sponge bath, then Vaseline, and finally baby powder.

As good as new! Peroxide deep cleansing toothpaste to remove lighter stains works very well. Apply a large amount and keep it for several hours. Wash it and reapply for about 6 hours. After washing and reapplying for 24 hours, the stain disappeared. I would have kept it for 24 hours, but I am not sure if it will damage the TPE sex dolls. It didn’t work well for the darker stains on my black hair wig that I kept for a few weeks.

Posted on

Caused More Serious Sex Dolls Stains

I tried searching the forums but couldn’t find the answer, so let’s get started. What is the best detergent for TPE sex doll? And let me be clear: I’m not asking for antifouling skills. I have a sex doll with dark stains and want to get rid of them. I want to know what products can do this. That is the information I seek.

I’ll get some! I have been using a benzoyl peroxide cream of 0.10%. This is much cheaper than the ointment I received from the doll. Rub it into the area and leave a coat on top and wait 12-24 hours. Can be used every time, even the dark purple purple stain that often appears on black wig caps. If the stain remover is effective, shouldn’t we be satisfied with the doll’s dress before removing the stain?

I don’t like to limit the color of clothes to a few, and I don’t like to wear clothes for a long time. Just make sure to test what you decide to use in a discrete location first. The soles of your feet or the top of your head. One of my dolls responded poorly to benzoyl peroxide. BP caused more serious sex dolls stains that could not be removed. It’s best to use products that work on dolls to understand what’s happening to them.

Posted on

Need To Cool And Dry Real Sex Dolls

Honestly, I didn’t think too much at the time, but after removing it a few hours later, I noticed a blue tone in the tibia and knee areas. This is not serious, but it is very obvious. The doll forum is useful because you can exchange ideas freely, so please take pictures / records of your repairs and post follow-up comments so others can learn from you! Is there any hope to completely solve this real sex doll problem?

I’m ready to accept the fact that real sex dolls may be a reason for failure-due to the fact that due to lack of experience, I should try it earlier, but I am willing to try it. Thanks in advance! To avoid soiling your clothes when buying new clothes: Fill the washing machine with the hottest water set point. Soak the clothes in soap for several hours. I am back and am sorry to be a MIA for a while; I am stuck in a game called “laughter in life”. I just redone the feet of a woman last night. It is an AS.

I used a hot air gun, a temperature sensor and a soldering iron, and a lot of baby oil haha! I placed a soldering iron at 250 ° C and I solved her foot problem, but now the TPE of the real sex doll is super sticky. I originally thought it was because it needed to be cooled and dried, but now it’s been 24 hours and it’s still sticky. To prevent TPE from sticking to socks, I cannot wear socks.

Posted on

What Methods Can Remove Stains From WM TPE Real Sex Dolls

Don’t get me wrong, this is not a bad thing. It’s just that you have to deal with and understand what needs to be compromised. The TPE real sex doll of the cheap doll has problems with wear and tear. There should be some posts on how to deal with these issues in the maintenance section. I recommend trying the search tool and spending an hour or so reading and watching some videos.

After I got the doll, I bought a TPE real sex doll puller kit. Although the solvent was sealed, it began to dry and thicken. What do I use to make it thin? I actually ordered something today to try to complete the labia enhancement work for Tessa, plus I noticed that there was a factory repair using this solvent, and I wanted to completely rebuild it … like cutting from her shoulder, Replace it with a piece of fresh TPE in the sample.

This way (hopefully) she will not leave a scar on her. Some things I noticed … if you use a solvent … you can’t heat the area to remove any blemishes … let us remove this blemishes by heating … so this happened a while ago, but I wonder if there is any way to remove stains from WM TPE real sex dolls? It comes from when I dressed her with blue leggings.