Category: Robot

Posted on

Apply Silicone Real Sex Doll Sealant

Please help. So does acetone melt the silicone, then cold weld the scars together, and then wear the sealant? Scars are thinner, so should I use a toothpick before applying acetone? Shouldn’t the sealant be too obvious once it is dry? I also added a photo to the original post. Acetone only cleans silicone and degreases it. But this is necessary before applying silicone real sex doll sealant.

It is difficult to repair such invisible scratches. Make sure to use as little silicone sealant as possible. You can also try using hexane instead of acetone. You can also dilute the silicone gum with hexane to make it softer (this applies to one-component silicone gum; please try before applying it to dolls). Let me guess it is a 100 cm doll from Aliexpress. I encountered the same problem today. I was able to rearrange my 165 cm doll because she did n’t tear. I still want to make a topic on it. If you take a look, it will also help you.

I don’t fix white fever is like charm no, she is 158 years old, and I won’t mention the manufacturer or distributor, because this is not the result of the quality of the doll. Sadly I am responsible for this. It was indeed unhealthy for her to be split too often. However, I’m not so sure about this, and I think using too much petroleum jelly inserts will greatly soften the TPE in this area, causing it to tear and rupture real sex dolls faster, even faster than it is done.

Posted on

Figure Out How To Heat Seal Sex Dolls

Any ideas that would help your question, but be sure to know how you would manage to seal it up (end result) … consider maybe one day (along the seams) to raise my own girl’s leg up, but mainly It’s “frightened” It’s hard to get back to the right state again. Thinking about stuffing and stitching almost makes me feel like I’m dealing with stuffing sex doll. I don’t care if my doll comes out of here, there is a nasty body Scars and fluffy legs.

I just can’t use her one leg to be heavy and loose. If I could lose weight, but she still had leg-like things at her tail, I would call it victory. For her, losing weight will not be the worst thing in the world. I cut my foot from the sole of the foot, moved it up, and managed to remove the bone. The broken part was at the weld before the hip joint, so once I cut the tape, it slipped out.

In addition to wounds on the soles of the feet and seams, TPE skin is also okay. I was able to cut the tape on my feet and knees without poking outside. Now, I just need to fill something inside to keep its shape, or tie a ribbon around it to keep the legs closed, or figure out how to heat-sex sex dolls. Still, I’m happy that at least heavy metals can be removed.

Posted on

Buy From A Reputable Sex Dolls Supplier

After playing with my TPE doll for a full month, when I stood up, my left hip joint broke. I bought it from a reputable sex doll supplier, and I don’t think I did anything to cause undue damage or pressure on that leg, I just had bad luck.

I spent the last two days in funk because it seemed like my doll had become useless. With one foot loosened, I needed almost three hands for the most basic repositioning. I have neither the tools nor the expertise to solve such problems. Even if it can be welded, the legs no longer bend. She can no longer stand up.

Then I realized that if my doll is now permanently trapped on the floor, what effect does the metal skeleton on the leg have? If I cut my leg apart and remove the metal in some way and then put in some sex dolls padding (possibly removed from the pillow) before sealing again, the leg will be at least not awkward whenever she moves . It’s not possible to pose now, so I’m not sure what I will lose by getting the metal out.

Posted on

These Flow Marks Are On The Ass Of The Sex Doll

My mattress is soft foam, so the shape of the butt is not bad, but these flow marks gradually formed on the butt of the sex doll, I want to see from the bed sheet. It’s not the primary eye, but it’s a bit rotten. I tried to put a warm towel on it, wipe it with some baby oil, and then wipe it with powder. A quick note about injecting mineral oil into the breast, if you pull out the needle, it will immediately leak out of the hole.

So I had to leave the needle in and pull the plunger every few hours to fill the syringe. Everything soaked overnight. Her feet are normal because when I think about or design a kimono, I tend to like to play with them. Help me relax. She is still new because it’s just here for a week now … to ship in warm weather After 6 days and being in the truck all day … so I think she may need to recover time … plugged the hole and everything went well in the bath.

The back part has softened a little, obviously also her knees, because this morning I found that the sex dolls had medium-sized tears on their knees, so I would inadvertently do so while sleeping. Unfortunately, I waited until next month to get her accessories, so I hope she can persist long enough to prepare everything for her.

Posted on

If Left For A Long Time Sex Dolls

Not sure how it works in real life, but it’s worth a try. She also got these creases. I usually rotate the position, lying on her back flat, lying on her abdomen (usually not too long, but it is best to touch the back and hips of the sex doll), the posture of the fetus (I make sure not to put heavy weight on the elbows And with one leg straight to balance her), then sit on a chair (this will make the blanket / sheets less likely to wrinkle under her).

I also put her on a blanket and found it helpful, but she would still wrinkle if left for a long time. The good news is that after two years with her, the creases always disappear to me. Sometimes it takes a few days. Similarly, it may be important to rotate her around every other day. From sleeping on one side to sleeping on one side in a fetal position, and then to the other side. If she’s in bed for more than a few days, that’s what I have to do.

Of course, there is a long line beside me to sleep here. So no one will feel too comfortable! Today, I am going to inject another 1 ml and call it good, and then try to inject 4 ml into the left breast. Then refill the hips. I didn’t stand up, so my doll has been lying on the mouths of sex dolls for the past two weeks.

Posted on

Is There Any Way To Solve This Sex Dolls Problem

In a few days, blunt needles may be the number one seller on Amazon, haha. The needle is: “1ml syringe with 23Ga 1.5 inch syringe and plastic needle with cap”. The name is really dazzling. The needle is indeed stainless steel. I always put obstacles between myself. I will not risk long-term contact with any polystyrene materials with TPE sex doll.

As for the wire issue, you will have to open her door to see if it is the pipe or pole skeleton system in use, and determine if it is decided to go this route, it will suit your doll. I received my 6Ye 164D today. She is a beautiful doll, and I have no regrets for the goods I bought.

However, there is some wear and tear on the c-section area out of the box. And I think it could be made worse by putting in a removable vagina. Although this is not a big problem for me, I wonder if there is any way to solve this sex dolls problem? The rest of the body is silky silky, and the crochet area (vagina and hips) is the only part. I apologize for the poor image quality.

Posted on

Want To Reduce The Time That Dyes Penetrate Into Sex Dolls

My 100 cm breasts are a little jerky, so I put 1 ml of nipples directly into a nipple, and I will do it several times throughout the day, maybe we can also rejuvenate them in this way. I had to deal with it, and even after her one-month rotation, she was still bland. My guess is that she was sitting in the warehouse for a long time before I got the sex doll, so I was spinning her every day and rubbing it to try to fix it.

Any ideas or suggestions? She is a doll. The head is everything, except for blue eyes and different hair. Wig linings are usually dark colored wigs. Either use a wig cap that is not black / dark, or choose a better wig.

I had the same problem with my BJD and its vinyl. I always wash my new wig, and if you want to reduce the time that dyes penetrate into sex dolls, you should probably do the same. Don’t be discouraged, just make this a better course for yourself.

Posted on

The Ultimate Real Sex Dolls Material To Try

Then start again. I think you have the right idea of ​​shredding and melting the tpe real sex doll! But this time it is very tiny, so you can use a hot air gun to melt the debris quickly like in the video. Then, as shown in the video, after briefly heating the dicing / cavity, sc up and transfer it to the dicing area using a stainless steel spoon finder. You can then use one of the “trowel / knife” tools.

I think you are trying to fill a lot of gaps as quickly as possible with the tools and methods you use. By using these types of tools, you can build layers more evenly. By processing tiny blocks, a better uniform fill will be created. Larger blocks fill the gap faster, but you end up trying to use too much real sex dolls, so you get tiny areas that don’t fully adhere to the surrounding layers.

But take a moment. I will give up the current course here. A soldering iron has been ineffective at performing this repair. The original repair shown in the previous post was not good enough, and I messed up her armpit. I tried to fill her armpit with the TPE test piece provided by the supplier, and it seemed difficult to make everything work. To me, the pressure in the underarm area is too great.

Posted on

I’m Not Sure About Contacting TPE Real Sex Dolls

But it seems that it has been waiting for at least a week since the first repairs were made to cure the TPE and become more resilient, as mentioned earlier. I will not do any other work until I get this test piece, but at the same time, I will post some links and information to show you exactly what I am using for this repair real sex doll. Even with a respirator that only filters organic vapors, I still feel the consequences of inhaling toxic TPE fumes.

The effects of the smoke on me were short-term memory loss, difficulty breathing, difficulty falling asleep and redness in my throat. After working with tears in a poorly ventilated area for about 40-50 minutes, it lasts about a week and a half. I live in an apartment, so there is no well-ventilated place. I did this in the bathroom with the exhaust fan turned on, then ran the shower, hoping to bind the TPE particles to the steam.

If you, like me, don’t have a well-ventilated work space, buy this mask for repair. As of now, this gas mask is priced at $ 31 on Amazon. I am not sure what the long-term effects of exposure to TPE real sex dolls smoke are, but the short-term effects are enough to make me uncomfortable at work. Honestly, the mask itself looks great.

Posted on

Waiting For TPE Real Sex Dolls From The Supplier

Still waiting for feedback from suppliers of TPE test pieces. I think you handled it well! Be patient, it looks much better than originally thought! I’ve been waiting for a week for the TPE to cure, and it seems to be better than it was a few days ago. I also contact the vendors who are testing TPE, so I still have to wait for some time to finish the real sex doll job. This is an impressive job.

Before that, I had to deal with a tear in the armpit, and all I used was, but all you had to do was a plastic surgeon. You can hardly tell from the last picture! Can’t wait to see the work done. Either way, I believe that others will find this feature useful, and seeing how you do it, it seems impossible, I really appreciate it!

I do n’t have experience with a soldering iron, so doing this work is quite daunting, especially when trying to use a hot air gun in advance will make the situation 5 times worse. I just make sure to search these forums to fix high stress areas. I haven’t been able to do any tearing work for about two weeks, and I’m still waiting to get a TPE real sex dolls test piece from the vendor.