Category: Skin

Posted on

If Left For A Long Time Sex Dolls

Not sure how it works in real life, but it’s worth a try. She also got these creases. I usually rotate the position, lying on her back flat, lying on her abdomen (usually not too long, but it is best to touch the back and hips of the sex doll), the posture of the fetus (I make sure not to put heavy weight on the elbows And with one leg straight to balance her), then sit on a chair (this will make the blanket / sheets less likely to wrinkle under her).

I also put her on a blanket and found it helpful, but she would still wrinkle if left for a long time. The good news is that after two years with her, the creases always disappear to me. Sometimes it takes a few days. Similarly, it may be important to rotate her around every other day. From sleeping on one side to sleeping on one side in a fetal position, and then to the other side. If she’s in bed for more than a few days, that’s what I have to do.

Of course, there is a long line beside me to sleep here. So no one will feel too comfortable! Today, I am going to inject another 1 ml and call it good, and then try to inject 4 ml into the left breast. Then refill the hips. I didn’t stand up, so my doll has been lying on the mouths of sex dolls for the past two weeks.

Posted on

Make It Sized To Cover The Body Of The Sex Doll

So far, everything feels very successful, and if I try, I can’t find any injection sight. Once the joint is about to perform work, I will report to the thread in a few days. The buttocks of the bubbles are a little stiff this morning, although they have improved a lot, so I will inject them again. You can take the blanket that came with her and fold it up to make it fit to cover the width of the sex doll‘s body, and then place it on the bed sheet.

This way, it creates a Cushing / double-layer barrier between her and the sheets. (Microfiber blankets don’t show drastic creases when they are wrinkled. Microfibers help a bit to “spread” the creases that happened. Yesterday, I put 3 Milliliter of oil, it feels significantly softer today! Although powdery, it is still shiny, and this photo shows the difference.

They appear over time, but they get more each time you wrinkle her. If your doll comes with a soft blanket, place it on the bed when you store it and they should disappear. I like the idea, maybe using any thicker soft blanket. Then you don’t have to drag the sex dolls along the sheets, you can just pull the blanket and slide her.

Posted on

I Am Curious If Anyone Has Tried Sex Dolls

I have put her down and worked for them many times, and made a few mineral oils locally, but they still have not loosened. On another sex doll from the same manufacturer, I was able to release them, soaking between work and applying mineral oil. I was worried about hurting my knees or breaking my hips, so today I ordered a few syringes with needles to try to oil directly, but before I was curious if anyone had tried it.

Has anyone injected the doll with mineral oil at the joints? The syringe is here today, and if someone is going to add something or a link to a topic on that topic, it would be a good time to attract me. Tomorrow is the day of injection, and I would love to have a little knowledge instead of taking the crazy scientist approach like I used to.

I give 0.6 ml to each hip until they stop creaking and then move until they reach the position I want-TPE sex dolls should absorb excess fat. The second one is easier. At that point, I fired a little gun at the joint, then probed down the side, then shot the rest, and coated it.

Posted on

Can You Feel Sex Dolls

Cool picture. Now that you know how it looks, can you feel the sex doll and see if it’s a weld or a bolt? The guess is the weld at the bottom of the spine above the bolt. I have the same problem. His hips froze and tried to flex, breaking his back. I made a 1.5-inch incision in the back and found a break below the back joint. The weld is torn from an inverted U-shaped hip tube.

I would have replaced it with a T-junction made of plumbing fittings, but subsequent movements broke the weaker U-tube at the top. I tried using a thicker wire harness to fix at least the hip joint of the U-shaped tube together, and it worked a little bit, but then the lines started coming out of the tube. I did not use expansion screws. I unplugged the wires instead of piercing myself at a bad moment.

(Guess there is no really good time to pierce yourself). Therefore, I tried to cut off the broken vertices from the U-shaped tube for easy use! / 2-inch water pipe joint, L-type joint and T-type joint instead of spine instead of sex dolls beams. This size fits the tube well, but only for straight parts, so try cutting off the curve.

Posted on

Is There Any Way To Solve This Sex Dolls Problem

In a few days, blunt needles may be the number one seller on Amazon, haha. The needle is: “1ml syringe with 23Ga 1.5 inch syringe and plastic needle with cap”. The name is really dazzling. The needle is indeed stainless steel. I always put obstacles between myself. I will not risk long-term contact with any polystyrene materials with TPE sex doll.

As for the wire issue, you will have to open her door to see if it is the pipe or pole skeleton system in use, and determine if it is decided to go this route, it will suit your doll. I received my 6Ye 164D today. She is a beautiful doll, and I have no regrets for the goods I bought.

However, there is some wear and tear on the c-section area out of the box. And I think it could be made worse by putting in a removable vagina. Although this is not a big problem for me, I wonder if there is any way to solve this sex dolls problem? The rest of the body is silky silky, and the crochet area (vagina and hips) is the only part. I apologize for the poor image quality.

Posted on

Want To Reduce The Time That Dyes Penetrate Into Sex Dolls

My 100 cm breasts are a little jerky, so I put 1 ml of nipples directly into a nipple, and I will do it several times throughout the day, maybe we can also rejuvenate them in this way. I had to deal with it, and even after her one-month rotation, she was still bland. My guess is that she was sitting in the warehouse for a long time before I got the sex doll, so I was spinning her every day and rubbing it to try to fix it.

Any ideas or suggestions? She is a doll. The head is everything, except for blue eyes and different hair. Wig linings are usually dark colored wigs. Either use a wig cap that is not black / dark, or choose a better wig.

I had the same problem with my BJD and its vinyl. I always wash my new wig, and if you want to reduce the time that dyes penetrate into sex dolls, you should probably do the same. Don’t be discouraged, just make this a better course for yourself.

Posted on

Adhesives Not Recommended For This Repair Real Sex Dolls

But I’m not sure what would I think if the maintenance staff saw a guy in a half-shirt with this when they came to my apartment? For my soldering iron, I chose this based on price and accessories. As someone who doesn’t use a soldering iron, this can easily be caught. If you are working on a TPE real sex doll, use a blade attachment. Sculpting is much easier, and an increase in surface area may make things faster.

But take a moment. I will give up the current course here. A soldering iron has been ineffective at performing this repair. The original repair shown in the previous post was not good enough, and I messed up her armpit. I tried to fill her armpit with the TPE test piece provided by the supplier, and it seemed difficult to make everything work. To me, the pressure in the underarm area is too great.

I tried RLSD’s TPE glue, and although it did play a role, the results for the armpit area were not satisfactory. This was a huge failure and I was reluctant to continue using the existing tools. It can be repaired, but it is not in my support right now. I really don’t want to risk using Loctite glue, or recommend any adhesive not recommended for this repair of real sex dolls.

Posted on

I’m Not Sure About Contacting TPE Real Sex Dolls

But it seems that it has been waiting for at least a week since the first repairs were made to cure the TPE and become more resilient, as mentioned earlier. I will not do any other work until I get this test piece, but at the same time, I will post some links and information to show you exactly what I am using for this repair real sex doll. Even with a respirator that only filters organic vapors, I still feel the consequences of inhaling toxic TPE fumes.

The effects of the smoke on me were short-term memory loss, difficulty breathing, difficulty falling asleep and redness in my throat. After working with tears in a poorly ventilated area for about 40-50 minutes, it lasts about a week and a half. I live in an apartment, so there is no well-ventilated place. I did this in the bathroom with the exhaust fan turned on, then ran the shower, hoping to bind the TPE particles to the steam.

If you, like me, don’t have a well-ventilated work space, buy this mask for repair. As of now, this gas mask is priced at $ 31 on Amazon. I am not sure what the long-term effects of exposure to TPE real sex dolls smoke are, but the short-term effects are enough to make me uncomfortable at work. Honestly, the mask itself looks great.

Posted on

Waiting For TPE Real Sex Dolls From The Supplier

Still waiting for feedback from suppliers of TPE test pieces. I think you handled it well! Be patient, it looks much better than originally thought! I’ve been waiting for a week for the TPE to cure, and it seems to be better than it was a few days ago. I also contact the vendors who are testing TPE, so I still have to wait for some time to finish the real sex doll job. This is an impressive job.

Before that, I had to deal with a tear in the armpit, and all I used was, but all you had to do was a plastic surgeon. You can hardly tell from the last picture! Can’t wait to see the work done. Either way, I believe that others will find this feature useful, and seeing how you do it, it seems impossible, I really appreciate it!

I do n’t have experience with a soldering iron, so doing this work is quite daunting, especially when trying to use a hot air gun in advance will make the situation 5 times worse. I just make sure to search these forums to fix high stress areas. I haven’t been able to do any tearing work for about two weeks, and I’m still waiting to get a TPE real sex dolls test piece from the vendor.

Posted on

I Will Not Try To Overuse Real Sex Dolls Today

When I recovered the excess tpe from the neck of the real sex doll, I cut a pair of skates near the top of the neck tube, so I did not touch the outer area. The challenge now is to get her in a good position to start processing TPE parts because my doll doesn’t have a flat elevated surface to place. Maybe I can put things together. Everything looks good, remember to slow down and keep talking for a few days.

When I first tried it, I was tempted to move on because I could see it running, but it would be best to do it for a while and then leave it for a while, it seemed like a viable approach. Looking again at the tearing of the armpit, I may get enough TPE from my neck, but I need to take it carefully to avoid damaging my neck.

I’ve thought a lot about it, and it’s important not to be hasty. If I did something wrong, please correct me, but I assume that it may be important for TPE real sex dolls to heal for a while, even if your work is not too far away. I won’t try to overuse it today, but at least try to fill the deepest part of my tears. I will update the thread with more pictures as soon as possible.