Category: Vagina

Posted on

Body Temperature Problems Often Seem To Occur Sex Doll

The sex doll does bring a lot of presence. This is an atypical company, but it has benefits. You should ask in advance to understand all the meanings, correct meanings, especially meanings that are not! It limits the risk of disappointment. As for sunlight, it’s best to avoid it. This is the baby’s vampire face … cold but not loving the sun. Through the pros and cons, I ate a lot of garlic and it didn’t bother him at all. I’m also a little scared of disappointment.

Anyway, I am the type that spends time before big purchases (usually you will tell me), but here I am given the impression that there are many differences. At least in terms of price. And I don’t know much about this topic. As long as I can’t “do it myself” with my doll, I believe it will still be the case. Realism is important to me, and the talent that silicones and artists seem to show seems obvious to me. I don’t know their dolls didn’t stand up, thank you for the information.

Bernal - Big Ass Blue Eyes 151CM TPE Love Doll

It won’t bother me too much. If I understand correctly, then if you want to use this option on other brands, and there are no screws or other plastic on the bottom of the foot, and I don’t care too much, then realism again, the temperature problem seems to occur frequently. Do you think this is really important? Of course, it must be a bit unpleasant to shrink on a slightly colder sex doll, but you have to get used to it relatively quickly, right?

Posted on

Looks Like An Inappropriate TPE Real Sex Doll Recipe

Personally, I don’t see how TPE glue can withstand such huge damage. I’m curious if anyone anywhere has ever succeeded in fixing something like a TPE tear. In addition, it almost looks like an inappropriate TPE real sex doll formula that is prone to cracking and failure. When you get the dolls, their eyelashes may stick to the eyeballs, or if you stick new eyelashes, they may glue the eyeballs.

In just a few minutes, your eyes will look like new. Just want to start a new thread, but you are very close to my subject. What effect does “haze” eyes have on the reflections and colors of a photo shoot? The color saturation of my IronTech standard eyes is too high (I will buy MF’s moving eyes later). So does the rough eye surface scatter the reflected light in some way, making the color look darker? Thank you (if you know the answer).

I would rather make them brighter, but dim eyes cast a diffused / blurred light and make the colors look dull. Will it remove glue completely? I have a doll with glue dripping, eyelashes, and eyelids stuck to the eyeballs. I can no longer remove my eyes from the socket. I bought about 8 different real sex dolls eye colors and then I need to make a mold so I can make it myself. It costs about 0.50 sets, compared to $ 5-8 for each set.

Posted on

Rest Between Real Sex Dolls Between Treatments

I hope to hear some information there that can help me. The doll’s arms will raise its head. I only raised her arm, but hugged it tightly in front of her. Will that break the seams? Well, these silicone dolls are in many ways more delicate and fragile than I thought. This is a learning curve. All real sex doll are indeed a learning curve. The good news is that as long as you understand this, there will be no problems.

At first I didn’t even know what it was. When she saw it, she told me and told me how to treat it. My lady has been there for many years and this is not a big deal. She is still here and still looks great. As long as you take care of her, your life will be too long. Now I can believe that they are aerosol sprays on sealants for sealing silicone dolls.

Just as they are applied on pigmented areas such as cosmetics, nipples and labia, a thin top-sealing film is formed. I haven’t found its name, and it hasn’t found its name, maybe an abyss or silicone doll maker might leave our bones here because it’s almost the idea of ​​a similar type of repair on the surface. She doesn’t need heat welding. This weakens the baby’s use of the substance for several days, and uses a tpe glue solvent to apply the glue line from the inside, and then continues the treatment, letting her real sex dolls rest between treatments.

Posted on

How To Fix Such Problems With Real Sex Dolls Article

Do not use heat. Suitable for TPE, not for silicone. Check out my 3-year review of Eve here. And posted a photo very similar to yours. It’s important to do this repair, unfortunately in the future you will have to keep checking if she has more “scratches” and take care of this if it happens. If she doesn’t, her chest may eventually fall. I have to use Eve to solve this real sex doll problem.

About 6 months after I got her, her child showed up. As long as you take care of it and don’t make it worse, it’s not a big deal. If you have further questions, please feel free to contact me. Do not use nail polish remover. Go to the hardware store in the paint area and buy a can of pure acetone. you are right! Those on me are nothing more than scratches, but “delaminated”-2 existing silicone panels spread out at the seams!

It happened after I raised her arm and wore a shirt on her. People warn that there is no one in the UK who can rebuild / repair this split, and I hope someone can heat the weld and rebuild from the inside out. I hope that if she can do that, she will return to normal from the inside out. Almost all internal structures can still be rebuilt / welded together. I have read several real sex dolls articles on how to fix this kind of problem, but I think it needs someone more skilled than me.

Posted on

Apply Silicone Real Sex Doll Sealant

Please help. So does acetone melt the silicone, then cold weld the scars together, and then wear the sealant? Scars are thinner, so should I use a toothpick before applying acetone? Shouldn’t the sealant be too obvious once it is dry? I also added a photo to the original post. Acetone only cleans silicone and degreases it. But this is necessary before applying silicone real sex doll sealant.

It is difficult to repair such invisible scratches. Make sure to use as little silicone sealant as possible. You can also try using hexane instead of acetone. You can also dilute the silicone gum with hexane to make it softer (this applies to one-component silicone gum; please try before applying it to dolls). Let me guess it is a 100 cm doll from Aliexpress. I encountered the same problem today. I was able to rearrange my 165 cm doll because she did n’t tear. I still want to make a topic on it. If you take a look, it will also help you.

I don’t fix white fever is like charm no, she is 158 years old, and I won’t mention the manufacturer or distributor, because this is not the result of the quality of the doll. Sadly I am responsible for this. It was indeed unhealthy for her to be split too often. However, I’m not so sure about this, and I think using too much petroleum jelly inserts will greatly soften the TPE in this area, causing it to tear and rupture real sex dolls faster, even faster than it is done.

Posted on

Usage And How Often You Bend Real Sex Dolls

Owned her since October 2017. As soft as her arrival, without any damage. I think they do stain easily, so either don’t wear any dark clothes on them or wash them off. Wash and dust the doll the first time you get it … grease for at least 3 to 4 months. Depending on your usage and how often you bend the real sex doll, it will determine your cleaning, oiling and powdering cycle.

This is one thing that is different for everyone. Keep in mind that most dolls deflate a little bit, which means that the oil will seep into the doll’s surface for a while, which means you may find very light oil spots on her or her linen clothes, which Is normal. Another thing is that you don’t wear dark clothes until you have washed the doll several times to get the mold out of the material.

If you do decide to dress the doll in dark clothes, it is best to just let her wear this color for about 6 to 8 hours, and then dress her with light clothes. Does anyone know how to remove the tiny scratches on the silicone skin? After a period of dress up, a scratch appeared on the shoulder of my brand new Sanhui silicone doll. Very noticeable after powdering. Guess there must be some common real sex dolls remedies for these things? She is too new.

Posted on

Pressure Site Treatment Real Sex Dolls

Depending on the TPE and the manufacturer, I would use a medium temperature of 140 to 170 ° C. (Note: I’m not sure if the display on the soldering station is correct, I always try to set it on the test piece first.) But this time the TPE real sex doll should melt safely, not just on the surface. So, due to the larger surface of the tool, this time I set the temperature to 250 ° C.

The test piece immediately became liquid but did not burn. How bad is the idea of ​​making a paste with some acetone and tpe pieces and smearing it in to try to seal the holes? Stand as if pasted in a paste, then lean a small diameter stone or glass noodle stick against it to secure it in place. Hey, I have a doll and I ordered to go home as soon as possible. I want to know if I should oil the doll or wait for several months when I first get it, and how often do I need to oil it.

I used to have four tpe dolls, but I think some have fueled a lot of people and some are not enough. Is it once a month or once every two months? When I first received her, I thought she was a newcomer. Do I still need oil now? I waited for a month before my initial baby oil treatment on my WM, and after that every 3-4 months. Occasionally, real-life dolls are treated with petroleum jelly for stress areas. Seems good to me.

Posted on

At Least I Can Pick Up Sex Dolls Again

To answer your other questions, it is not difficult to remove the TPE sex doll from the skeleton. The bottom of the foot was most damaged because I needed to cut it open to remove standing foot metal, but for the rest of the leg, this was just a progressive cut along the seam. Once I cut the tape at the knee joint, peeled it off and cut the TPE from the drill bit stuck to the metal until it was completely separated, it was simple.

I would open the hips and tie the metal back with a metal zipper to keep her legs soft but still workable. I just sealed it up and used the video on YouTube-using heatgun and metal pieces .. feasible and sure. Thanks for the information you provided, I haven’t realized that there will be tape and TPE / metal bonding to make it so difficult.

However, if my supplier cannot fix the replacement body, I might try to see if it is possible to cut the TPE around the tape / metal without puncturing the surface. Even if it causes external damage, it is better than a completely loose leg. I think in this regard, even a complete amputation of the leg is better than my current situation. I have to make sure that no water comes in from the open stump, but at least I can pick up sex dolls again.

Posted on

Some Parts Are Easily Exposed To Sex Dolls Metal

I’m afraid there will still be something missing that will prevent it from working, so I think I should ask more knowledge experts. Is it feasible / a good idea to remove the metal skeleton from a hip fractured leg? I’ve contacted my sex doll vendor and I’m waiting to fix this, but I didn’t expect anything. In the meantime, I have been brainstorming about bone removal. It is difficult to remove bones like the legs.

It is absolutely difficult to bond TPE to metal and then remove it from the metal. I have done this many times, but this is to separate the doll from the torso, but I know that the legs are usually impossible and the toes are simply impossible without destroying the doll. I have tried welding joints but there is no solution because the oil has contaminated the metal and flux cored welding does not last very long.

I am afraid that these broken parts are actually ends and cannot be completed. After 7 weeks of use, I had the same experience on dolls. About the inability to remove the skeletal leg is absolutely correct. At least on my doll, some parts can easily expose the sex dolls metal, leading people to think you can slide the metal out. Unfortunately, this is not the case.

Posted on

I Am Curious If Anyone Has Tried Sex Dolls

I have put her down and worked for them many times, and made a few mineral oils locally, but they still have not loosened. On another sex doll from the same manufacturer, I was able to release them, soaking between work and applying mineral oil. I was worried about hurting my knees or breaking my hips, so today I ordered a few syringes with needles to try to oil directly, but before I was curious if anyone had tried it.

Has anyone injected the doll with mineral oil at the joints? The syringe is here today, and if someone is going to add something or a link to a topic on that topic, it would be a good time to attract me. Tomorrow is the day of injection, and I would love to have a little knowledge instead of taking the crazy scientist approach like I used to.

I give 0.6 ml to each hip until they stop creaking and then move until they reach the position I want-TPE sex dolls should absorb excess fat. The second one is easier. At that point, I fired a little gun at the joint, then probed down the side, then shot the rest, and coated it.