Tag: Alternatives

Posted on

Use It Sparingly To Clean The Real Sex Doll Area

Don’t ask about colors-these are tattoos done with permanent marks. I am trying to remove them, but some colors cannot be removed. Is it possible to repair such a big damage. When buying a nail polish remover, make sure it is a true acetone, not an environmentally friendly alternative, as it can be used as a nail polish remover, but it cannot clean and remove silicone grease. Use acetone, but keep in mind that it is a solvent, not a strong solvent, but you should use it with care to clean the real sex doll area before using latex.

Now, if you have a smooth hand, my preferred method is to use a low power soldering iron and use the tip of a flat spoon to slip across the area. Do not use a hot air gun. Do not use the heating period. It’s silicone! Is the silicon window frame? The bathtub? ceramic tile? Yes? That’s great! No? It’s easy (through practice). Just apply silicone with a toothpick to fill the gap. Wet your fingers with your tongue (do not do this when sealing the house) and gently slide your fingers along the scratch.

This results in a uniform, smooth surface. On any silicone that has exceeded the desired location, use a small piece of kitchen towel or microfiber cloth with acetone (or 100% iso-alcohol, which is my preferred product). I intend to say the same thing. Looks like layering. I got these on the eve. It looks like it was close to her breasts while Eve. As said, use a small amount on a toothpick. Don’t forget to cross the area with acetone first, otherwise the added silicone real sex dolls won’t stick.

Posted on

Obvious Error Caused A Big Bug In Real Sex Dolls

I have been saying recently that he will provide repair services, and I think this particular job will be something he can solve. I know he is moving now, but it doesn’t hurt to send him an email through the website, or you can send a message through the forum, good luck! I want to share my question here because this is a good real sex doll topic.

I accidentally cut her ass, and then I did spread her legs too much, too many times, and she was heated. Those obvious mistakes created a big loophole (don’t ask about colors-these are tattoos done with permanent marks. I’m trying to remove them, but some colors can’t be removed). Is it possible to fix such a big damage? I was thinking: prepare some plates with hot TPE and pour into the holes (similar to a cup of hot milk).

There are new holes in my solid quality. Use some vaginal / butt sex toys and paste them in the holes. Same as above, but I will join again with hot TPE. I want to share my question here because this is a good topic. I accidentally cut her ass, and then I did spread her legs too much, too many times, and she was heated. Those obvious mistakes caused a big hole in real sex dolls.

Posted on

Did Not Deliberately Make The Ankle Of The Real Sex Doll

I think you have a final decision on this particular issue. If my car fails after 200 miles, the dealer will repair the car instead of replacing it … a fair compromise. But we need to discuss what you suggested in the first article. I want to discuss guarantees, and I hope that many real sex doll suppliers will join in.

I still hope that someone in the UK can fix this. As I said in the OP, the internal structure still exists, and if she can be reunited from inside to outside in some way, she may return to normal. When it comes to this particular industry, it’s clear that there isn’t much to do with regard to consumer rights, which is something that many doll owners have to deal with. In my opinion, this is a very serious problem. I think your quarry is reasonable, but it won’t surprise me because they cause you trouble. This has become a familiar practice among many of these manufacturers.

Of course, this is just my opinion. Thanks for your comments so far. I believe the forum can help me solve this problem. So, in short, the vendor is very firm in recommending his competitor to replace my first doll because of a bad neck. Now, because the ankle he sold to me broke, not the neck of the real sex dolls, he didn’t need to replace it.

Posted on

Very Custom Real Sex Dolls On Order

To break it down. Is there a major difference between a defective ankle or a defective neck? Or is the defect a defect? Two people admitted that their ankles were soft (you were three years old) and two others (I was one), and we both knew what we did wrong. Indeed, you may be doing something unknowingly rather than deliberately causing a real sex doll‘s ankle to do so.

You just don’t remember. You can ship her to me and I will repair her. You have fun with your girl on her back …. you need to support her head with a pillow. Are you happy with your girl, she is on your thigh, and you and her head face continue to fall . I’m personally in a similar situation, and needless to say, it really makes me discouraged.

Having said that, it means that he will fix the problem and even pay for the shipping, you can’t be better, for me it is he who takes care of you. Is a good supplier, and I’m sure that frustration and poor communication along the way can lead to this misunderstanding. I have to look back. I typed a long thing, but I lost it. No venting .. Seeking a third party … like arbitration. It’s frustrating. Don’t explode anyone here. Outstanding on very custom real sex dolls orders.

Posted on

If Left For A Long Time Sex Dolls

Not sure how it works in real life, but it’s worth a try. She also got these creases. I usually rotate the position, lying on her back flat, lying on her abdomen (usually not too long, but it is best to touch the back and hips of the sex doll), the posture of the fetus (I make sure not to put heavy weight on the elbows And with one leg straight to balance her), then sit on a chair (this will make the blanket / sheets less likely to wrinkle under her).

I also put her on a blanket and found it helpful, but she would still wrinkle if left for a long time. The good news is that after two years with her, the creases always disappear to me. Sometimes it takes a few days. Similarly, it may be important to rotate her around every other day. From sleeping on one side to sleeping on one side in a fetal position, and then to the other side. If she’s in bed for more than a few days, that’s what I have to do.

Of course, there is a long line beside me to sleep here. So no one will feel too comfortable! Today, I am going to inject another 1 ml and call it good, and then try to inject 4 ml into the left breast. Then refill the hips. I didn’t stand up, so my doll has been lying on the mouths of sex dolls for the past two weeks.

Posted on

Make It Sized To Cover The Body Of The Sex Doll

So far, everything feels very successful, and if I try, I can’t find any injection sight. Once the joint is about to perform work, I will report to the thread in a few days. The buttocks of the bubbles are a little stiff this morning, although they have improved a lot, so I will inject them again. You can take the blanket that came with her and fold it up to make it fit to cover the width of the sex doll‘s body, and then place it on the bed sheet.

This way, it creates a Cushing / double-layer barrier between her and the sheets. (Microfiber blankets don’t show drastic creases when they are wrinkled. Microfibers help a bit to “spread” the creases that happened. Yesterday, I put 3 Milliliter of oil, it feels significantly softer today! Although powdery, it is still shiny, and this photo shows the difference.

They appear over time, but they get more each time you wrinkle her. If your doll comes with a soft blanket, place it on the bed when you store it and they should disappear. I like the idea, maybe using any thicker soft blanket. Then you don’t have to drag the sex dolls along the sheets, you can just pull the blanket and slide her.

Posted on

I Am Curious If Anyone Has Tried Sex Dolls

I have put her down and worked for them many times, and made a few mineral oils locally, but they still have not loosened. On another sex doll from the same manufacturer, I was able to release them, soaking between work and applying mineral oil. I was worried about hurting my knees or breaking my hips, so today I ordered a few syringes with needles to try to oil directly, but before I was curious if anyone had tried it.

Has anyone injected the doll with mineral oil at the joints? The syringe is here today, and if someone is going to add something or a link to a topic on that topic, it would be a good time to attract me. Tomorrow is the day of injection, and I would love to have a little knowledge instead of taking the crazy scientist approach like I used to.

I give 0.6 ml to each hip until they stop creaking and then move until they reach the position I want-TPE sex dolls should absorb excess fat. The second one is easier. At that point, I fired a little gun at the joint, then probed down the side, then shot the rest, and coated it.

Posted on

Can You Feel Sex Dolls

Cool picture. Now that you know how it looks, can you feel the sex doll and see if it’s a weld or a bolt? The guess is the weld at the bottom of the spine above the bolt. I have the same problem. His hips froze and tried to flex, breaking his back. I made a 1.5-inch incision in the back and found a break below the back joint. The weld is torn from an inverted U-shaped hip tube.

I would have replaced it with a T-junction made of plumbing fittings, but subsequent movements broke the weaker U-tube at the top. I tried using a thicker wire harness to fix at least the hip joint of the U-shaped tube together, and it worked a little bit, but then the lines started coming out of the tube. I did not use expansion screws. I unplugged the wires instead of piercing myself at a bad moment.

(Guess there is no really good time to pierce yourself). Therefore, I tried to cut off the broken vertices from the U-shaped tube for easy use! / 2-inch water pipe joint, L-type joint and T-type joint instead of spine instead of sex dolls beams. This size fits the tube well, but only for straight parts, so try cutting off the curve.

Posted on

Where An Extra Tpe Sex Dolls Plugin Is Placed

The best option is to make the smallest incision on the back of the sex doll, yes, this will leave scars. But then you can tell people that she had a back surgery. Anyway, go back and make a small incision and see how much can be repaired. Personally, if you are trying to keep an upright TPE heavy, I wouldn’t use multiple strands of wire for repairs because it would bend the wires.

If you do this, you may need to pay more attention to the 2/0 cable. I will cut and add a new joint instead of other joints. This won’t be as easy as a finger repair. This will be a major operation … think twice before proceeding or cutting. It is difficult to provide further advice without really knowing / seeing what we are doing here. Theoretically … it can be done. you can do it.

As suggested by the Department of Health, stay away from electrical wires, etc … Unfortunately, it does not have strength. Also, depending on where it is actually damaged / captured / failed, etc., you must also determine exactly what kind of repair you will be able to make. You might want to put an extra tpe sex dolls plugin in it and practice it, cutting it and melting it back. Make sure there is a temperature setting on the soldering iron so you can set it enough to melt the tpe.

Posted on

The Ultimate Real Sex Dolls Material To Try

Then start again. I think you have the right idea of ​​shredding and melting the tpe real sex doll! But this time it is very tiny, so you can use a hot air gun to melt the debris quickly like in the video. Then, as shown in the video, after briefly heating the dicing / cavity, sc up and transfer it to the dicing area using a stainless steel spoon finder. You can then use one of the “trowel / knife” tools.

I think you are trying to fill a lot of gaps as quickly as possible with the tools and methods you use. By using these types of tools, you can build layers more evenly. By processing tiny blocks, a better uniform fill will be created. Larger blocks fill the gap faster, but you end up trying to use too much real sex dolls, so you get tiny areas that don’t fully adhere to the surrounding layers.

But take a moment. I will give up the current course here. A soldering iron has been ineffective at performing this repair. The original repair shown in the previous post was not good enough, and I messed up her armpit. I tried to fill her armpit with the TPE test piece provided by the supplier, and it seemed difficult to make everything work. To me, the pressure in the underarm area is too great.