I Will Not Try To Overuse Real Sex Dolls Today

When I recovered the excess tpe from the neck of the real sex doll, I cut a pair of skates near the top of the neck tube, so I did not touch the outer area. The challenge now is to get her in a good position to start processing TPE parts because my doll doesn’t have a flat elevated surface to place. Maybe I can put things together. Everything looks good, remember to slow down and keep talking for a few days.

When I first tried it, I was tempted to move on because I could see it running, but it would be best to do it for a while and then leave it for a while, it seemed like a viable approach. Looking again at the tearing of the armpit, I may get enough TPE from my neck, but I need to take it carefully to avoid damaging my neck.

I’ve thought a lot about it, and it’s important not to be hasty. If I did something wrong, please correct me, but I assume that it may be important for TPE real sex dolls to heal for a while, even if your work is not too far away. I won’t try to overuse it today, but at least try to fill the deepest part of my tears. I will update the thread with more pictures as soon as possible.

Until We Find The Solution Real Sex Dolls

It’s a pity that only 2 weeks after taking it, she had so much tears under her armpit. Well, until I picked up the heat gun, it wasn’t that big (I shouldn’t do it …), now it’s almost as deep as the bone joints. I don’t need to worry about the tears in the armpits. I have owned another WM real sex doll for two years.

As if they changed the TPE mix, it was so ridiculous and less flexible than my first. I should know that using a hot air gun on one of the areas that may withstand the highest pressure is a bad idea, but I won’t give up. Here is what I have on hand: 1. Hot air gun (with infrared thermometer) 2. Cheap electric soldering iron set (with some accessories) 3. Available credit: | I am not a newbie, but this accident made me Be confident that you are a newbie.

By the way, I want to store real sesx dolls in my room all the way to the lower arm (for obvious reasons) until we find a solution. I don’t want to be one of those guys who sound desperate, but I really want to be transparent, even if this process takes me weeks to complete.

Add And Smooth Proficient Repairs Of TPE Sex Dolls

All in all, if I use Vaseline in small amounts, the TPE sex doll will heal over time, can I use TPE glue to repair the tear? Or am I forced to take the hot air gun route for repair? I can only speak and read English, but I think this is a bastard, and if I correctly guess the label, the label on the apricot may be more sour. I think most rinsing products are acidic and may erode TPE.

Women’s Health.gov quotes Most doctors advise women not to rinse. Exudation can change the necessary balance between vaginal flora (bacteria living in the vagina) and natural acidity in a healthy vagina. A healthy vagina has good and harmful bacteria. Bacterial balance helps maintain an acidic environment. I don’t think any application of anything will offset this damage.

Other than the skilled repair of adding and smoothing TPE sex dolls like a factory, I think this is hard to fix and maybe stabilizing it is the best option you want. Unfortunately, the damage has already been done. If you do not disturb you, you will need to perform repairs there or only repairs will be accepted. But move on and I will change your cleaning routine.

I Always Wash Sex Dolls After Use

I notice that TPE sex doll often contain a certain amount of oil, and I want to make the doll’s skin flexible … Do you think any of your cleaning habits might use these possible results? Given its current fragility, I would not use baby oil in the area. Baby oil may make the area excessively soft, making it worse. I use vaseline there. And only a small amount is needed to wet the area.

Enough to make the surface look moist. Do not wipe on it. Given the current state of tpe, I would not use Nivea cream either. It contains water. TPE pouring out and already in a fragile state can cause mold. The strain zone (which looks like a cooked turkey) has more gaps for bacteria to enter.

And there is not enough oil in the pores; the water in Nivea Cream can be used by any remaining bacteria to make mold. Seen another doll owner using it on this forum, so I think it should be fine. I’m really not sure what the reason is because I always wash the entire body of sex dolls after use, but only the damage in that particular area … So far, my best guess is that if too much, baby powder Can the material be dried?

Prevent Further Damage To Real Sex Dolls

As always, the choice is yours. So what is the best way to smooth the thighs of real sex doll again. No need to order tools or special TPE- “glue”? This looks like a good smoothing method. The larger cut may not disappear, but it appears to prevent further damage. But you should be fine, like everything, I might test in areas like the soles of my feet to see what kind of reaction you get.

If you’re worried about the bug landing on your lady … I mix a bottle of 20 drops of mint, 20 drops of lavender essential oil diluted with vodka, then shake it in a spray bottle and spray it on the girl. Sitting by the pool. Stay away from errors. The vodka evaporated quickly, leaving the essential oil scattered on my doll, no bugs. It would be a shame if it was really caused by powder.

I am preparing for the upcoming trip, and I put a small bottle to use as an insect repellent. It smells good too. Did I use too much heat to redo my feet and the TPE molecules changed? TPE real sex doll is always sticky, but it is very sticky ….. a fly will land on her feet and cannot take off again! (Perhaps the law is exaggerated) But has anyone encountered it? But yes, her stains are from stockings made in China .. Now that makes sense.

The Only Option Is To Fix Real Sex Dolls

Whenever I finish hot processing and keep using baby oil like this, I leave the area for an hour or two after finishing, and then sprinkle it with powder, which is usually okay. My poor IT150 bruised the right front thigh. Honestly, I don’t know what’s going on. Just in the heat, when she stood in the guard room, I suddenly saw the real sex doll, and I wanted to give her a good night hug. Okay, let’s keep it simple.

Half of these ingredients (many ingredients don’t actually tell you what they mean, if you really want to know, you need to use a further Google search), I don’t wear women’s clothes. My real sex doll Jennifer’s left wrist broke today and I don’t know what to do. Soon after using her, both wrists were loosened, and today looks good when playing. I certainly let her sit on the bed with her arms.

After a while, when I came back, she tilted to the left, but her hand didn’t touch anything, but her wrist was now soft like a fish, and I heard a harsh sound when I moved. I’ve seen articles about using wristbands on forums. Is this my only option or can I fix real sex dolls? What exactly do you want to use it for? A small amount (not very regularly) may not cause much trouble, but I do not use it extensively or personally.

You Will Need To Open Your Real Sex Dolls

It really depends on whether your real sex doll is TPE or platinum silicone … From a sound perspective, a floppy disk like a fish sounds more like TPE. Therefore, I will be based on the TPE model. Most TPE dolls use a hand / fingerboard where the wires are connected to the board and can move the wrist and fingers. Unlike platinum silicone, the wrist joint is bolted to the hand plate.

She is a TPE doll. It felt like she had only one wire in her hand. I can feel the wires all the way to my wrist, no clapper board. I just noticed the wire sticking out from the little finger of her right hand. I’m not keen on cutting her because I don’t have the right equipment for this kind of repair, so it seems that the wristband is my best choice at the moment. I thought I would eventually have to replace her body, but it was only a few weeks before I delivered her, which was really disappointing.

Do not order from Amazon. The crunching sound was the wires rubbing against the board. You will need to open your wrists and hands of real sex dolls to operate. I suggest working with her from the palm looks more natural. You will need to clean the hands by removing the glue that originally fixed the wires. You can do this by using a small drill bit to clear the glue that holds the wires.

My Girlfriend Doesn’t Like My Real Sex Dolls

I have a Wm 165k and it’s been years. At present, the tolerance of a new larger breasted real sex doll is out of range. I’m going on vacation … if the chest is big enough to afford it, I will use the rest for new models. That’s why it failed. I did a full day of strapless bras on Jesse with similar silicone strips on them, no bad effects.

Although I am always cautious about new clothes and don’t leave them for too long without checking, it seems that some silicones can safely contact TPE. Bad entertainment seems to be related to sex toys. The initial perimeter was 18-1 / 2 “. I was very enthusiastic and raised it to 23-1/2”. My method is to use a hypodermic needle and an aquarium pump. I bought a 6-foot tube and a T-junction.

The ends are the same length to ensure proper pressure distribution. Pop music is heartbreaking … I should be slow, or at least take time to stretch. Gradually my girlfriend didn’t like my doll, so I stored real sex dolls. The size of the holes did increase (much larger than the picture shown). I have tried with some success. I know I shouldn’t try to increase the size …. But I still have to laugh out loud.

To See If Your Real Sex Dolls Have A Warranty

I don’t know if you can really call it on the real sex doll company, but due to all the copper wires used by Chinese doll manufacturers, all dolls in the TPE category suffer from finger-popping injuries and broken wrists. They all use boards with connecting wires to allow wrist and finger movements. The hands of all Chinese-made dolls suffer from the same problem, so it doesn’t matter who the manufacturer is.

You may need to contact Esll to see if your real sex doll has a warranty. I have the same problem. Now, I keep the stockings, but I fold the tops of the stockings back so that the silicone faces up when not needed. If needed, I can easily fold it up. Unless I study otherwise, I do just that.

Is there a way to eliminate burrs? I tried to smooth them with a welding torch. I can match colors that don’t match. Can’t see it directly. Any suggestions are greatly appreciated. It depends on how the wrists stay together. If it’s like what my real sex dolls have, it’s a matter of tightening the threaded fasteners, it’s easy.

Local Adult Supplies Real Sex Dolls Store

I got a pair of stockings with a garter, they are almost impossible to fit! But we managed to do it and wore them the night before and they looked great. But be patient, first operate the garter as much as possible, and then let her feet begin to rest on top of the stockings without breaking them as usual. Yuko wore it for several hours without any discomfort. Unfortunate. The difference in the TPE real sex doll mix does indeed make it difficult to spot the problem.

I think I need to do some small tests to see if it will hurt my real sex doll. She now wears stockings because she is almost always inside. If it does work, you can easily cover it up. I do have a strapless bra. That was one of the few bras I had for her. I will postpone testing that. I can easily find online without stockings. My taste is boring though. Give me black transparent stockings and I’m fine.

But the local adult sex reals dolls store near me only has steel socks. It would be nice to be able to support local business. It’s hard to determine, but those look different from my style. The mine is basically a piece of clothing. They look like stockings tied to a garter made of lace. I have to put them on her like pantyhose, but there is a big hole in the upper thigh, haha. When I take a picture of her, I should take a picture.