Tag: Breast

Posted on

Some Parts Are Easily Exposed To Sex Dolls Metal

I’m afraid there will still be something missing that will prevent it from working, so I think I should ask more knowledge experts. Is it feasible / a good idea to remove the metal skeleton from a hip fractured leg? I’ve contacted my sex doll vendor and I’m waiting to fix this, but I didn’t expect anything. In the meantime, I have been brainstorming about bone removal. It is difficult to remove bones like the legs.

It is absolutely difficult to bond TPE to metal and then remove it from the metal. I have done this many times, but this is to separate the doll from the torso, but I know that the legs are usually impossible and the toes are simply impossible without destroying the doll. I have tried welding joints but there is no solution because the oil has contaminated the metal and flux cored welding does not last very long.

I am afraid that these broken parts are actually ends and cannot be completed. After 7 weeks of use, I had the same experience on dolls. About the inability to remove the skeletal leg is absolutely correct. At least on my doll, some parts can easily expose the sex dolls metal, leading people to think you can slide the metal out. Unfortunately, this is not the case.

Posted on

Buy From A Reputable Sex Dolls Supplier

After playing with my TPE doll for a full month, when I stood up, my left hip joint broke. I bought it from a reputable sex doll supplier, and I don’t think I did anything to cause undue damage or pressure on that leg, I just had bad luck.

I spent the last two days in funk because it seemed like my doll had become useless. With one foot loosened, I needed almost three hands for the most basic repositioning. I have neither the tools nor the expertise to solve such problems. Even if it can be welded, the legs no longer bend. She can no longer stand up.

Then I realized that if my doll is now permanently trapped on the floor, what effect does the metal skeleton on the leg have? If I cut my leg apart and remove the metal in some way and then put in some sex dolls padding (possibly removed from the pillow) before sealing again, the leg will be at least not awkward whenever she moves . It’s not possible to pose now, so I’m not sure what I will lose by getting the metal out.

Posted on

Hope There Are Plastic Sex Dolls Around The Foam

But … as stated elsewhere, these cheap skeleton welds suck, but they are made of hardened steel, so I tried to drill a hole in the sex doll spinal joint for fixation, but on HD I The best drills you can’t buy have found nothing. I tried a hacksaw and a small one with a cutting wheel, but found nothing. Later, I will try to use the new one better, but I worry about the heat generated inside the tube and the TPE damage.

Greater TPE reductions may be required. At the same time, I found that I loved her great flexibility and personal responsiveness, as well as the interesting new poses she can do now. So … I am thinking of terry cloth tucks into the jagged gap to protect TPE and myself and keep it as it is. Then we will reduce some weight and use the right raw materials when closing the wound.

We don’t make tpe sex dolls almost as hot as the mold is poured, so the foam should be good, but I hope there is plastic around the foam so that it will not suck oil from tpe and dry, and the saturated foam will not save A lot of weight. The weld was torn, leaving a weld-sized hole on the top of the inverted U-shaped tube, which was speculated to be 1×2 cm, which caused the tube to become weak and unable to withstand the torque generated by further leg movement. There is a 140 cm thick TPE doll with hip joints that are too tight, and can only swing their legs when flat, and it takes a lot of time to move them.

Posted on

Is There Any Way To Solve This Sex Dolls Problem

In a few days, blunt needles may be the number one seller on Amazon, haha. The needle is: “1ml syringe with 23Ga 1.5 inch syringe and plastic needle with cap”. The name is really dazzling. The needle is indeed stainless steel. I always put obstacles between myself. I will not risk long-term contact with any polystyrene materials with TPE sex doll.

As for the wire issue, you will have to open her door to see if it is the pipe or pole skeleton system in use, and determine if it is decided to go this route, it will suit your doll. I received my 6Ye 164D today. She is a beautiful doll, and I have no regrets for the goods I bought.

However, there is some wear and tear on the c-section area out of the box. And I think it could be made worse by putting in a removable vagina. Although this is not a big problem for me, I wonder if there is any way to solve this sex dolls problem? The rest of the body is silky silky, and the crochet area (vagina and hips) is the only part. I apologize for the poor image quality.

Posted on

Want To Reduce The Time That Dyes Penetrate Into Sex Dolls

My 100 cm breasts are a little jerky, so I put 1 ml of nipples directly into a nipple, and I will do it several times throughout the day, maybe we can also rejuvenate them in this way. I had to deal with it, and even after her one-month rotation, she was still bland. My guess is that she was sitting in the warehouse for a long time before I got the sex doll, so I was spinning her every day and rubbing it to try to fix it.

Any ideas or suggestions? She is a doll. The head is everything, except for blue eyes and different hair. Wig linings are usually dark colored wigs. Either use a wig cap that is not black / dark, or choose a better wig.

I had the same problem with my BJD and its vinyl. I always wash my new wig, and if you want to reduce the time that dyes penetrate into sex dolls, you should probably do the same. Don’t be discouraged, just make this a better course for yourself.

Posted on

Have You Given Up On This Real Sex Dolls Project

I can’t navigate the repair kit without errors, so I assume it’s out of stock. Any further suggestions are appreciated. I am going to throw away the towel. Today, I’ve done some welding work on her armpits, but the results did not excite me. I closed her armpit as much as possible to reduce the pressure, then pushed the iron into her armpit and started sliding the needle tip left and right to melt the TPE real sex doll.

After waiting for about an hour, and the latest article I published in the thread, I went back to the room to look at her armpit again, and it actually looked more promising than any photos shared in the thread. All I need to do now is make sure the tip is deep enough to avoid getting the effect of Swiss cheese.

I don’t know if you have given up all hope for this real sex dolls project, but maybe you can try to change your technology and add some tools to help you get better results? Read it carefully, and it seems that you can complete all the published tasks with only a soldering iron blade! ? Great, I want to say you can only do so much with one tool! If you are not satisfied, try fewer Swiss cheeses.

Posted on

Waiting For TPE Real Sex Dolls From The Supplier

Still waiting for feedback from suppliers of TPE test pieces. I think you handled it well! Be patient, it looks much better than originally thought! I’ve been waiting for a week for the TPE to cure, and it seems to be better than it was a few days ago. I also contact the vendors who are testing TPE, so I still have to wait for some time to finish the real sex doll job. This is an impressive job.

Before that, I had to deal with a tear in the armpit, and all I used was, but all you had to do was a plastic surgeon. You can hardly tell from the last picture! Can’t wait to see the work done. Either way, I believe that others will find this feature useful, and seeing how you do it, it seems impossible, I really appreciate it!

I do n’t have experience with a soldering iron, so doing this work is quite daunting, especially when trying to use a hot air gun in advance will make the situation 5 times worse. I just make sure to search these forums to fix high stress areas. I haven’t been able to do any tearing work for about two weeks, and I’m still waiting to get a TPE real sex dolls test piece from the vendor.

Posted on

Until We Find The Solution Real Sex Dolls

It’s a pity that only 2 weeks after taking it, she had so much tears under her armpit. Well, until I picked up the heat gun, it wasn’t that big (I shouldn’t do it …), now it’s almost as deep as the bone joints. I don’t need to worry about the tears in the armpits. I have owned another WM real sex doll for two years.

As if they changed the TPE mix, it was so ridiculous and less flexible than my first. I should know that using a hot air gun on one of the areas that may withstand the highest pressure is a bad idea, but I won’t give up. Here is what I have on hand: 1. Hot air gun (with infrared thermometer) 2. Cheap electric soldering iron set (with some accessories) 3. Available credit: | I am not a newbie, but this accident made me Be confident that you are a newbie.

By the way, I want to store real sesx dolls in my room all the way to the lower arm (for obvious reasons) until we find a solution. I don’t want to be one of those guys who sound desperate, but I really want to be transparent, even if this process takes me weeks to complete.

Posted on

Suggestions For More Experienced Sex Dolls Users

People with some experience can certainly do this, but if you haven’t used tpe sex doll at all, it definitely isn’t. Due to toxic fumes, etc., precautions must also be taken. I’m a newbie, so please think twice. I have never experienced this look on a doll before, but I want to know … When you clean the doll’s private area, do you use boiling water?

I remember mentioning in a tutorial that TPE can melt or slightly liquefy at 200 degrees Celsius … if you use boiling water above that temperature to clean private areas and then let it air dry, it may be really fast to heat and Cooling may be the cause of structural cracking.

Once again, you got more experienced sex dolls user suggestions before me, I just made a guess based on what I saw that looks like too dry, which may be caused by high temperature or rapid evaporation and material deterioration . Another thing to note-dishwashing soap (I know you only mentioned “mild soap”, so I’m not sure) and similar soaps tend to be “oil solvents” when mixed with water. This is the main idea used when washing dishes with a lot of grease or oil.

Posted on

I Will Be In Some Spare Tpe Sex Dolls

Lubricants and suds should be suspicious. Use baby oil to clean and maintain the correct condition. The soap will remove the oil and will quickly destroy her. These piper sex doll are fragile and need to cheer on privately. I agree that it is too early, but it seems to enjoy a high reputation, and I am very convinced that the problem lies in my daily maintenance.

I had previously sent an email to Kimi and he contacted the manufacturer and they suggested that I use a hot air gun to melt the rough surface of the TPE and stop using the existing soap. I’m not sure if I want to try this, I worry that I will eventually hurt her further because the damage is also inside the orifice. At the same time, I completely stop moving her to prevent further tearing.

Take a quick look, if you are sure you want to use hot air to reach the area, then I will not use a hot air gun, but instead use a variable hot hot air rework station with a thin nozzle. Even then, I am cautious because the area deforms under a certain amount of tension and it is easy to open when hot air is applied. Personally, I will do some exercises on some spare tpe sex dolls until you are proficient in the method.