Tag: Japanese

Posted on

Where An Extra Tpe Sex Dolls Plugin Is Placed

The best option is to make the smallest incision on the back of the sex doll, yes, this will leave scars. But then you can tell people that she had a back surgery. Anyway, go back and make a small incision and see how much can be repaired. Personally, if you are trying to keep an upright TPE heavy, I wouldn’t use multiple strands of wire for repairs because it would bend the wires.

If you do this, you may need to pay more attention to the 2/0 cable. I will cut and add a new joint instead of other joints. This won’t be as easy as a finger repair. This will be a major operation … think twice before proceeding or cutting. It is difficult to provide further advice without really knowing / seeing what we are doing here. Theoretically … it can be done. you can do it.

As suggested by the Department of Health, stay away from electrical wires, etc … Unfortunately, it does not have strength. Also, depending on where it is actually damaged / captured / failed, etc., you must also determine exactly what kind of repair you will be able to make. You might want to put an extra tpe sex dolls plugin in it and practice it, cutting it and melting it back. Make sure there is a temperature setting on the soldering iron so you can set it enough to melt the tpe.

Posted on

I’m Not Sure About Contacting TPE Real Sex Dolls

But it seems that it has been waiting for at least a week since the first repairs were made to cure the TPE and become more resilient, as mentioned earlier. I will not do any other work until I get this test piece, but at the same time, I will post some links and information to show you exactly what I am using for this repair real sex doll. Even with a respirator that only filters organic vapors, I still feel the consequences of inhaling toxic TPE fumes.

The effects of the smoke on me were short-term memory loss, difficulty breathing, difficulty falling asleep and redness in my throat. After working with tears in a poorly ventilated area for about 40-50 minutes, it lasts about a week and a half. I live in an apartment, so there is no well-ventilated place. I did this in the bathroom with the exhaust fan turned on, then ran the shower, hoping to bind the TPE particles to the steam.

If you, like me, don’t have a well-ventilated work space, buy this mask for repair. As of now, this gas mask is priced at $ 31 on Amazon. I am not sure what the long-term effects of exposure to TPE real sex dolls smoke are, but the short-term effects are enough to make me uncomfortable at work. Honestly, the mask itself looks great.

Posted on

Waiting For TPE Real Sex Dolls From The Supplier

Still waiting for feedback from suppliers of TPE test pieces. I think you handled it well! Be patient, it looks much better than originally thought! I’ve been waiting for a week for the TPE to cure, and it seems to be better than it was a few days ago. I also contact the vendors who are testing TPE, so I still have to wait for some time to finish the real sex doll job. This is an impressive job.

Before that, I had to deal with a tear in the armpit, and all I used was, but all you had to do was a plastic surgeon. You can hardly tell from the last picture! Can’t wait to see the work done. Either way, I believe that others will find this feature useful, and seeing how you do it, it seems impossible, I really appreciate it!

I do n’t have experience with a soldering iron, so doing this work is quite daunting, especially when trying to use a hot air gun in advance will make the situation 5 times worse. I just make sure to search these forums to fix high stress areas. I haven’t been able to do any tearing work for about two weeks, and I’m still waiting to get a TPE real sex dolls test piece from the vendor.

Posted on

Might Be Better For Larger Real Sex Dolls Areac

And I will avoid using hot air guns, because I am not sure it will not work even in the final smoothing. A larger flat tool (such as a heated spoon) may help smooth the area, but in the end it has nothing to do with appearance, but functionality and repair are crucial so it doesn’t get worse. I also have a real sex doll that needs repair-just like your arm.

But the degree of tearing is small, I will fix my problem this way, and I will get a repair video. I can’t believe this will attract your attention and Arthur’s attention! Here I did receive a test piece from Tan WM, which started to restore my confidence and I have been practicing the test piece in a “well-ventilated work area”. I’m using a knife tip and it takes some time to smooth it, so I know it will take a lot of time.

If the size of the attachment is three times the original, it may be better for larger real sex dolls areas, but I am willing to do this for a long time. I know it’s easy to smooth it with my hot air gun, but since everyone says the hot air gun is a bad idea, smoothing it will be a bigger task. It doesn’t seem impossible, it’s just tedious.

Posted on

Your Repair Of Damaged Areas Real Sex Dolls

I know how you feel about doing the same thing a year ago, although the damage I caused was much more serious because I mistakenly heated and flattened my little groin tears and made it worse by using tpe filler The area of ​​a real sex doll. The good news is that I believe that this kind of damage can be repaired using the methods detailed in Mishka’s tpe repair thread.

For best results, I suggest you use a variable thermal welding station (buy my mine from eBay for £ 20) and then practice the technique used by Mishka, which works with small pieces of tpe as you gradually Work it into the damaged area and build a layer of tpe. If you look at this link, this is my personal experience.

I didn’t forget to make sure you do any such work in a well-ventilated place, and you will need proper masks to reach toxic fumes (3 million euros are affordable and available from many eBay sellers). Hope this helps and good luck! I’ve seen your thread several times, and the fixes you made to real sex dolls are not very noteworthy.

Posted on

Suggestions For More Experienced Sex Dolls Users

People with some experience can certainly do this, but if you haven’t used tpe sex doll at all, it definitely isn’t. Due to toxic fumes, etc., precautions must also be taken. I’m a newbie, so please think twice. I have never experienced this look on a doll before, but I want to know … When you clean the doll’s private area, do you use boiling water?

I remember mentioning in a tutorial that TPE can melt or slightly liquefy at 200 degrees Celsius … if you use boiling water above that temperature to clean private areas and then let it air dry, it may be really fast to heat and Cooling may be the cause of structural cracking.

Once again, you got more experienced sex dolls user suggestions before me, I just made a guess based on what I saw that looks like too dry, which may be caused by high temperature or rapid evaporation and material deterioration . Another thing to note-dishwashing soap (I know you only mentioned “mild soap”, so I’m not sure) and similar soaps tend to be “oil solvents” when mixed with water. This is the main idea used when washing dishes with a lot of grease or oil.

Posted on

What To Do To Fix TPE Sex Dolls

It is best to notify the manufacturer for a recommended maintenance schedule. There are rumors that some new TPE sex doll should not be oiled like early TPEs. I also have a problem and I will receive my beautiful girl in a week or two. I want to know if I can wash it two or three times in a row and then apply the powder, or if I need to wash powder and do this multiple times.

Because many doll owners ask to do so to remove all chemical products. I did something similar the first time I got the doll. The next day after she arrived, I washed it once, and the next day. It was finally washed three more times on the same day that all the manure was dumped. Don’t give her powder until she is completely dry.

As for washing, I stood on a sponge with a plain rag and dipped a teaspoon of Dawn Dish Soap in a few quarts of warm water. This is really needed. I hope I can see something like this early when I first buy a doll. They are still healthy, but the makeup of the areola and vaginal area is gone. I want to know what can be done to fix the small holes in TPE sex dolls?

Posted on

Or Maybe The Formula Of TPE Sex Dolls Is Different

It might work for multiple applications, but I haven’t tried it. It’s no big deal for me, because I prefer sex doll black hair, and she is always black hair, I have some stains on my body and rubbed mineral oil on the spots a few times. I guess the mineral oil breaks them down and brings them inside, but it’s gone now. I must express my approval as a detergent.

Eva has been sitting in a red dress for too long, leaving terrible stains on her back, which obviously didn’t get enough time to be washed. Hopefully I’ve taken both before and after taking the picture, but when I first saw the stains couldn’t take the camera out, I was so angry. Interestingly, my 6ye doll has been wearing this dress for a much longer time and has not been soiled at all.

It may be because she is older and has less oil left, or maybe the formula of TPE sex dolls is different. Anyway, I usually paint the stained area in maximum intensity and leave it for about 48 hours. It dries and becomes crusty. Then I washed it with diluted dishwashing liquid / water and it worked very well. Basically the stain is gone. We will see here what happened, but the results impressed us.

Posted on

Need To Cool And Dry Real Sex Dolls

Honestly, I didn’t think too much at the time, but after removing it a few hours later, I noticed a blue tone in the tibia and knee areas. This is not serious, but it is very obvious. The doll forum is useful because you can exchange ideas freely, so please take pictures / records of your repairs and post follow-up comments so others can learn from you! Is there any hope to completely solve this real sex doll problem?

I’m ready to accept the fact that real sex dolls may be a reason for failure-due to the fact that due to lack of experience, I should try it earlier, but I am willing to try it. Thanks in advance! To avoid soiling your clothes when buying new clothes: Fill the washing machine with the hottest water set point. Soak the clothes in soap for several hours. I am back and am sorry to be a MIA for a while; I am stuck in a game called “laughter in life”. I just redone the feet of a woman last night. It is an AS.

I used a hot air gun, a temperature sensor and a soldering iron, and a lot of baby oil haha! I placed a soldering iron at 250 ° C and I solved her foot problem, but now the TPE of the real sex doll is super sticky. I originally thought it was because it needed to be cooled and dried, but now it’s been 24 hours and it’s still sticky. To prevent TPE from sticking to socks, I cannot wear socks.

Posted on

What Methods Can Remove Stains From WM TPE Real Sex Dolls

Don’t get me wrong, this is not a bad thing. It’s just that you have to deal with and understand what needs to be compromised. The TPE real sex doll of the cheap doll has problems with wear and tear. There should be some posts on how to deal with these issues in the maintenance section. I recommend trying the search tool and spending an hour or so reading and watching some videos.

After I got the doll, I bought a TPE real sex doll puller kit. Although the solvent was sealed, it began to dry and thicken. What do I use to make it thin? I actually ordered something today to try to complete the labia enhancement work for Tessa, plus I noticed that there was a factory repair using this solvent, and I wanted to completely rebuild it … like cutting from her shoulder, Replace it with a piece of fresh TPE in the sample.

This way (hopefully) she will not leave a scar on her. Some things I noticed … if you use a solvent … you can’t heat the area to remove any blemishes … let us remove this blemishes by heating … so this happened a while ago, but I wonder if there is any way to remove stains from WM TPE real sex dolls? It comes from when I dressed her with blue leggings.