Tag: Nursing

Posted on

Use It Sparingly To Clean The Real Sex Doll Area

Don’t ask about colors-these are tattoos done with permanent marks. I am trying to remove them, but some colors cannot be removed. Is it possible to repair such a big damage. When buying a nail polish remover, make sure it is a true acetone, not an environmentally friendly alternative, as it can be used as a nail polish remover, but it cannot clean and remove silicone grease. Use acetone, but keep in mind that it is a solvent, not a strong solvent, but you should use it with care to clean the real sex doll area before using latex.

Now, if you have a smooth hand, my preferred method is to use a low power soldering iron and use the tip of a flat spoon to slip across the area. Do not use a hot air gun. Do not use the heating period. It’s silicone! Is the silicon window frame? The bathtub? ceramic tile? Yes? That’s great! No? It’s easy (through practice). Just apply silicone with a toothpick to fill the gap. Wet your fingers with your tongue (do not do this when sealing the house) and gently slide your fingers along the scratch.

This results in a uniform, smooth surface. On any silicone that has exceeded the desired location, use a small piece of kitchen towel or microfiber cloth with acetone (or 100% iso-alcohol, which is my preferred product). I intend to say the same thing. Looks like layering. I got these on the eve. It looks like it was close to her breasts while Eve. As said, use a small amount on a toothpick. Don’t forget to cross the area with acetone first, otherwise the added silicone real sex dolls won’t stick.

Posted on

Obvious Error Caused A Big Bug In Real Sex Dolls

I have been saying recently that he will provide repair services, and I think this particular job will be something he can solve. I know he is moving now, but it doesn’t hurt to send him an email through the website, or you can send a message through the forum, good luck! I want to share my question here because this is a good real sex doll topic.

I accidentally cut her ass, and then I did spread her legs too much, too many times, and she was heated. Those obvious mistakes created a big loophole (don’t ask about colors-these are tattoos done with permanent marks. I’m trying to remove them, but some colors can’t be removed). Is it possible to fix such a big damage? I was thinking: prepare some plates with hot TPE and pour into the holes (similar to a cup of hot milk).

There are new holes in my solid quality. Use some vaginal / butt sex toys and paste them in the holes. Same as above, but I will join again with hot TPE. I want to share my question here because this is a good topic. I accidentally cut her ass, and then I did spread her legs too much, too many times, and she was heated. Those obvious mistakes caused a big hole in real sex dolls.

Posted on

Pressure Site Treatment Real Sex Dolls

Depending on the TPE and the manufacturer, I would use a medium temperature of 140 to 170 ° C. (Note: I’m not sure if the display on the soldering station is correct, I always try to set it on the test piece first.) But this time the TPE real sex doll should melt safely, not just on the surface. So, due to the larger surface of the tool, this time I set the temperature to 250 ° C.

The test piece immediately became liquid but did not burn. How bad is the idea of ​​making a paste with some acetone and tpe pieces and smearing it in to try to seal the holes? Stand as if pasted in a paste, then lean a small diameter stone or glass noodle stick against it to secure it in place. Hey, I have a doll and I ordered to go home as soon as possible. I want to know if I should oil the doll or wait for several months when I first get it, and how often do I need to oil it.

I used to have four tpe dolls, but I think some have fueled a lot of people and some are not enough. Is it once a month or once every two months? When I first received her, I thought she was a newcomer. Do I still need oil now? I waited for a month before my initial baby oil treatment on my WM, and after that every 3-4 months. Occasionally, real-life dolls are treated with petroleum jelly for stress areas. Seems good to me.

Posted on

Did Not Deliberately Make The Ankle Of The Real Sex Doll

I think you have a final decision on this particular issue. If my car fails after 200 miles, the dealer will repair the car instead of replacing it … a fair compromise. But we need to discuss what you suggested in the first article. I want to discuss guarantees, and I hope that many real sex doll suppliers will join in.

I still hope that someone in the UK can fix this. As I said in the OP, the internal structure still exists, and if she can be reunited from inside to outside in some way, she may return to normal. When it comes to this particular industry, it’s clear that there isn’t much to do with regard to consumer rights, which is something that many doll owners have to deal with. In my opinion, this is a very serious problem. I think your quarry is reasonable, but it won’t surprise me because they cause you trouble. This has become a familiar practice among many of these manufacturers.

Of course, this is just my opinion. Thanks for your comments so far. I believe the forum can help me solve this problem. So, in short, the vendor is very firm in recommending his competitor to replace my first doll because of a bad neck. Now, because the ankle he sold to me broke, not the neck of the real sex dolls, he didn’t need to replace it.

Posted on

These Flow Marks Are On The Ass Of The Sex Doll

My mattress is soft foam, so the shape of the butt is not bad, but these flow marks gradually formed on the butt of the sex doll, I want to see from the bed sheet. It’s not the primary eye, but it’s a bit rotten. I tried to put a warm towel on it, wipe it with some baby oil, and then wipe it with powder. A quick note about injecting mineral oil into the breast, if you pull out the needle, it will immediately leak out of the hole.

So I had to leave the needle in and pull the plunger every few hours to fill the syringe. Everything soaked overnight. Her feet are normal because when I think about or design a kimono, I tend to like to play with them. Help me relax. She is still new because it’s just here for a week now … to ship in warm weather After 6 days and being in the truck all day … so I think she may need to recover time … plugged the hole and everything went well in the bath.

The back part has softened a little, obviously also her knees, because this morning I found that the sex dolls had medium-sized tears on their knees, so I would inadvertently do so while sleeping. Unfortunately, I waited until next month to get her accessories, so I hope she can persist long enough to prepare everything for her.

Posted on

Make It Sized To Cover The Body Of The Sex Doll

So far, everything feels very successful, and if I try, I can’t find any injection sight. Once the joint is about to perform work, I will report to the thread in a few days. The buttocks of the bubbles are a little stiff this morning, although they have improved a lot, so I will inject them again. You can take the blanket that came with her and fold it up to make it fit to cover the width of the sex doll‘s body, and then place it on the bed sheet.

This way, it creates a Cushing / double-layer barrier between her and the sheets. (Microfiber blankets don’t show drastic creases when they are wrinkled. Microfibers help a bit to “spread” the creases that happened. Yesterday, I put 3 Milliliter of oil, it feels significantly softer today! Although powdery, it is still shiny, and this photo shows the difference.

They appear over time, but they get more each time you wrinkle her. If your doll comes with a soft blanket, place it on the bed when you store it and they should disappear. I like the idea, maybe using any thicker soft blanket. Then you don’t have to drag the sex dolls along the sheets, you can just pull the blanket and slide her.

Posted on

Hope There Are Plastic Sex Dolls Around The Foam

But … as stated elsewhere, these cheap skeleton welds suck, but they are made of hardened steel, so I tried to drill a hole in the sex doll spinal joint for fixation, but on HD I The best drills you can’t buy have found nothing. I tried a hacksaw and a small one with a cutting wheel, but found nothing. Later, I will try to use the new one better, but I worry about the heat generated inside the tube and the TPE damage.

Greater TPE reductions may be required. At the same time, I found that I loved her great flexibility and personal responsiveness, as well as the interesting new poses she can do now. So … I am thinking of terry cloth tucks into the jagged gap to protect TPE and myself and keep it as it is. Then we will reduce some weight and use the right raw materials when closing the wound.

We don’t make tpe sex dolls almost as hot as the mold is poured, so the foam should be good, but I hope there is plastic around the foam so that it will not suck oil from tpe and dry, and the saturated foam will not save A lot of weight. The weld was torn, leaving a weld-sized hole on the top of the inverted U-shaped tube, which was speculated to be 1×2 cm, which caused the tube to become weak and unable to withstand the torque generated by further leg movement. There is a 140 cm thick TPE doll with hip joints that are too tight, and can only swing their legs when flat, and it takes a lot of time to move them.

Posted on

Very Simple Repair Sex Dolls

Crossing your back is the best. You don’t want to mess up the front face of the sex doll. The scars may be more messy than you think. You should post a skull picture here so that other TDF members pay 2 cents. Try to simulate what you want to do, take some channels and test them to see how it looks and how easy it is for your ideas to come together.

This is a problem with many of these doll sub-frames … many are outsourced because there are many similarities in design. Some people now make child frames internally. This is the difference between TPE and platinum silicone resin. One is a hot casting process and the other is a cold casting process, so you can avoid the use of PVC metal joints wrapped with foam.

When joints break, this is a very simple fix for sex dolls. However, when using TPE, you may encounter problems if you weld metal fittings to pipes or rods. Then you are working on a whole new set of questions. Here are some good things to fix tpe with a hot air gun, I think if we cut our back for spine repair or replacement, we will steal some tpe from the inside and replace it with foam.

Posted on

Where An Extra Tpe Sex Dolls Plugin Is Placed

The best option is to make the smallest incision on the back of the sex doll, yes, this will leave scars. But then you can tell people that she had a back surgery. Anyway, go back and make a small incision and see how much can be repaired. Personally, if you are trying to keep an upright TPE heavy, I wouldn’t use multiple strands of wire for repairs because it would bend the wires.

If you do this, you may need to pay more attention to the 2/0 cable. I will cut and add a new joint instead of other joints. This won’t be as easy as a finger repair. This will be a major operation … think twice before proceeding or cutting. It is difficult to provide further advice without really knowing / seeing what we are doing here. Theoretically … it can be done. you can do it.

As suggested by the Department of Health, stay away from electrical wires, etc … Unfortunately, it does not have strength. Also, depending on where it is actually damaged / captured / failed, etc., you must also determine exactly what kind of repair you will be able to make. You might want to put an extra tpe sex dolls plugin in it and practice it, cutting it and melting it back. Make sure there is a temperature setting on the soldering iron so you can set it enough to melt the tpe.

Posted on

Breasts Look Bigger Sex Dolls

Is that wig a doll? My doll has a lot of wigs, but all of the sex doll‘s wigs are light-colored inside. The inside of artificial wigs is usually black and will stain the doll’s head. I just bought a doll and the same problem occurred with the wig. This is also a very good wig.

Strangely, the entire wig cap was black, but it was simply the elastic belt that caused the problem. I just stopped using the straps and instead used a hair band to secure the wig to her head. It also happened to my doll. I am very sorry to see this. Although I am not that bad, I have encountered similar problems, including one wig.

Time will eliminate most of the discoloration. Usually, you can prevent this contamination by sewing a wig cap inside the wig so that the band does not come in direct contact with the doll, but this is too bad and I will get another wig. Fortunately, I cleaned them again with a detergent. The jet lag of our sex dolls. The breasts in this photo look bigger, but this is just the appearance and the same size.