Tag: Nursing

Posted on

The Ultimate Real Sex Dolls Material To Try

Then start again. I think you have the right idea of ​​shredding and melting the tpe real sex doll! But this time it is very tiny, so you can use a hot air gun to melt the debris quickly like in the video. Then, as shown in the video, after briefly heating the dicing / cavity, sc up and transfer it to the dicing area using a stainless steel spoon finder. You can then use one of the “trowel / knife” tools.

I think you are trying to fill a lot of gaps as quickly as possible with the tools and methods you use. By using these types of tools, you can build layers more evenly. By processing tiny blocks, a better uniform fill will be created. Larger blocks fill the gap faster, but you end up trying to use too much real sex dolls, so you get tiny areas that don’t fully adhere to the surrounding layers.

But take a moment. I will give up the current course here. A soldering iron has been ineffective at performing this repair. The original repair shown in the previous post was not good enough, and I messed up her armpit. I tried to fill her armpit with the TPE test piece provided by the supplier, and it seemed difficult to make everything work. To me, the pressure in the underarm area is too great.

Posted on

I’m Not Sure About Contacting TPE Real Sex Dolls

But it seems that it has been waiting for at least a week since the first repairs were made to cure the TPE and become more resilient, as mentioned earlier. I will not do any other work until I get this test piece, but at the same time, I will post some links and information to show you exactly what I am using for this repair real sex doll. Even with a respirator that only filters organic vapors, I still feel the consequences of inhaling toxic TPE fumes.

The effects of the smoke on me were short-term memory loss, difficulty breathing, difficulty falling asleep and redness in my throat. After working with tears in a poorly ventilated area for about 40-50 minutes, it lasts about a week and a half. I live in an apartment, so there is no well-ventilated place. I did this in the bathroom with the exhaust fan turned on, then ran the shower, hoping to bind the TPE particles to the steam.

If you, like me, don’t have a well-ventilated work space, buy this mask for repair. As of now, this gas mask is priced at $ 31 on Amazon. I am not sure what the long-term effects of exposure to TPE real sex dolls smoke are, but the short-term effects are enough to make me uncomfortable at work. Honestly, the mask itself looks great.

Posted on

Your Repair Of Damaged Areas Real Sex Dolls

I know how you feel about doing the same thing a year ago, although the damage I caused was much more serious because I mistakenly heated and flattened my little groin tears and made it worse by using tpe filler The area of ​​a real sex doll. The good news is that I believe that this kind of damage can be repaired using the methods detailed in Mishka’s tpe repair thread.

For best results, I suggest you use a variable thermal welding station (buy my mine from eBay for £ 20) and then practice the technique used by Mishka, which works with small pieces of tpe as you gradually Work it into the damaged area and build a layer of tpe. If you look at this link, this is my personal experience.

I didn’t forget to make sure you do any such work in a well-ventilated place, and you will need proper masks to reach toxic fumes (3 million euros are affordable and available from many eBay sellers). Hope this helps and good luck! I’ve seen your thread several times, and the fixes you made to real sex dolls are not very noteworthy.

Posted on

I Always Wash Sex Dolls After Use

I notice that TPE sex doll often contain a certain amount of oil, and I want to make the doll’s skin flexible … Do you think any of your cleaning habits might use these possible results? Given its current fragility, I would not use baby oil in the area. Baby oil may make the area excessively soft, making it worse. I use vaseline there. And only a small amount is needed to wet the area.

Enough to make the surface look moist. Do not wipe on it. Given the current state of tpe, I would not use Nivea cream either. It contains water. TPE pouring out and already in a fragile state can cause mold. The strain zone (which looks like a cooked turkey) has more gaps for bacteria to enter.

And there is not enough oil in the pores; the water in Nivea Cream can be used by any remaining bacteria to make mold. Seen another doll owner using it on this forum, so I think it should be fine. I’m really not sure what the reason is because I always wash the entire body of sex dolls after use, but only the damage in that particular area … So far, my best guess is that if too much, baby powder Can the material be dried?

Posted on

Or Maybe The Formula Of TPE Sex Dolls Is Different

It might work for multiple applications, but I haven’t tried it. It’s no big deal for me, because I prefer sex doll black hair, and she is always black hair, I have some stains on my body and rubbed mineral oil on the spots a few times. I guess the mineral oil breaks them down and brings them inside, but it’s gone now. I must express my approval as a detergent.

Eva has been sitting in a red dress for too long, leaving terrible stains on her back, which obviously didn’t get enough time to be washed. Hopefully I’ve taken both before and after taking the picture, but when I first saw the stains couldn’t take the camera out, I was so angry. Interestingly, my 6ye doll has been wearing this dress for a much longer time and has not been soiled at all.

It may be because she is older and has less oil left, or maybe the formula of TPE sex dolls is different. Anyway, I usually paint the stained area in maximum intensity and leave it for about 48 hours. It dries and becomes crusty. Then I washed it with diluted dishwashing liquid / water and it worked very well. Basically the stain is gone. We will see here what happened, but the results impressed us.

Posted on

Not Sure If It Will Damage TPE Sex Dolls

I haven’t encountered it yet. I just wiped it, covered it with a fresh coat, then washed the sex doll with neutral soap, oiled the area and then powdered it. Washing clothes in salt water seems to lock color and prevent bleeding. I’ve been photographing my black and red outfits and playing without penalty. I will not leave these things for more than a few hours.

I haven’t finished all of these articles, but letting go, I have achieved amazing success with 5% benzoyl peroxide. I’ll put on some, and then you just need to leave it and apply it for about three more days a day, then the stain completely disappears! However, after that I recommend using a good quality sponge bath, then Vaseline, and finally baby powder.

As good as new! Peroxide deep cleansing toothpaste to remove lighter stains works very well. Apply a large amount and keep it for several hours. Wash it and reapply for about 6 hours. After washing and reapplying for 24 hours, the stain disappeared. I would have kept it for 24 hours, but I am not sure if it will damage the TPE sex dolls. It didn’t work well for the darker stains on my black hair wig that I kept for a few weeks.

Posted on

The Only Option Is To Fix Real Sex Dolls

Whenever I finish hot processing and keep using baby oil like this, I leave the area for an hour or two after finishing, and then sprinkle it with powder, which is usually okay. My poor IT150 bruised the right front thigh. Honestly, I don’t know what’s going on. Just in the heat, when she stood in the guard room, I suddenly saw the real sex doll, and I wanted to give her a good night hug. Okay, let’s keep it simple.

Half of these ingredients (many ingredients don’t actually tell you what they mean, if you really want to know, you need to use a further Google search), I don’t wear women’s clothes. My real sex doll Jennifer’s left wrist broke today and I don’t know what to do. Soon after using her, both wrists were loosened, and today looks good when playing. I certainly let her sit on the bed with her arms.

After a while, when I came back, she tilted to the left, but her hand didn’t touch anything, but her wrist was now soft like a fish, and I heard a harsh sound when I moved. I’ve seen articles about using wristbands on forums. Is this my only option or can I fix real sex dolls? What exactly do you want to use it for? A small amount (not very regularly) may not cause much trouble, but I do not use it extensively or personally.

Posted on

You Will Need To Open Your Real Sex Dolls

It really depends on whether your real sex doll is TPE or platinum silicone … From a sound perspective, a floppy disk like a fish sounds more like TPE. Therefore, I will be based on the TPE model. Most TPE dolls use a hand / fingerboard where the wires are connected to the board and can move the wrist and fingers. Unlike platinum silicone, the wrist joint is bolted to the hand plate.

She is a TPE doll. It felt like she had only one wire in her hand. I can feel the wires all the way to my wrist, no clapper board. I just noticed the wire sticking out from the little finger of her right hand. I’m not keen on cutting her because I don’t have the right equipment for this kind of repair, so it seems that the wristband is my best choice at the moment. I thought I would eventually have to replace her body, but it was only a few weeks before I delivered her, which was really disappointing.

Do not order from Amazon. The crunching sound was the wires rubbing against the board. You will need to open your wrists and hands of real sex dolls to operate. I suggest working with her from the palm looks more natural. You will need to clean the hands by removing the glue that originally fixed the wires. You can do this by using a small drill bit to clear the glue that holds the wires.

Posted on

My Girlfriend Doesn’t Like My Real Sex Dolls

I have a Wm 165k and it’s been years. At present, the tolerance of a new larger breasted real sex doll is out of range. I’m going on vacation … if the chest is big enough to afford it, I will use the rest for new models. That’s why it failed. I did a full day of strapless bras on Jesse with similar silicone strips on them, no bad effects.

Although I am always cautious about new clothes and don’t leave them for too long without checking, it seems that some silicones can safely contact TPE. Bad entertainment seems to be related to sex toys. The initial perimeter was 18-1 / 2 “. I was very enthusiastic and raised it to 23-1/2”. My method is to use a hypodermic needle and an aquarium pump. I bought a 6-foot tube and a T-junction.

The ends are the same length to ensure proper pressure distribution. Pop music is heartbreaking … I should be slow, or at least take time to stretch. Gradually my girlfriend didn’t like my doll, so I stored real sex dolls. The size of the holes did increase (much larger than the picture shown). I have tried with some success. I know I shouldn’t try to increase the size …. But I still have to laugh out loud.

Posted on

It’s Easy To Catch My Real Sex Dolls

Then remove the finger wires … these will be wrapped with gauze to make the TPE real sex doll stick to the wires, so removing them will be a challenge. I even folded up my stockings without straps. just in case. Some stockings are still tight. I picked up some pink stockings with straps and some new black pairs. Those pairs had no straps but a garter. I have different views on how to deal with these issues.

They are not easy to get on TPE dolls, but if I cut off the garter, the stockings will be fine. On the other hand, they are really easy to catch my real sex doll, but they won’t stay up late without the garter attached. Decide, decide. Lol. After all, it’s time to upgrade the finger line with something thicker than copper. I usually use thicker and stronger galvanized wires.

Take some construction glue and fill it with real sex dolls, then plug in the wires. Don’t worry about trimming the wires, but set the adhesive first, which will take several hours to cure. After the curing time has passed, you may need to do some shrink wrap and then place it on the end of the wire to make it less sharp. Insert the wire into the appropriate finger and close it. My preferred method is the hot knife method, but for many people they use the cold melt method or the solvent method.