Tag: Pedophilia

Posted on

We Don’t Know Much About Me Sex Doll

For photos, you must place the link directly. Therefore, your photos must be stored somewhere first. If it is an image in the site, you can right-click the image and then execute “Copy Address of Image”. If not, it is possible to register in the gallery of the forum so that you can put your photo on top and you can use the link to the sex doll image to display it in the forum’s post exactly. One day I want to buy a comic statue because I am a fan.

And, from place to place, I found myself buying a beautiful 1 m doll. 35 years old, silver-haired, I nicknamed her. I haven’t received it yet, it’s long enough, but I’m already looking for websites to dress her up and make her sexy and personal. .. This is how I found myself on your site. Temporarily locked In short, as soon as I receive it, I will introduce it to you in more detail!

Bernal - Big Ass Blue Eyes 151CM TPE Love Doll

I am not yet a minor. However, it can grow quickly if the husband wishes (and this command can be used). When we make mistakes without basic information rules, this person always has the opportunity to stay in those places and correct some of course. But since I talk more about the way the sentence rotates than sex dolls, and everyone stays on 1m28, we don’t know much about me.

Posted on

How Many Days Will It Take To Reach A Satisfactory Temperature Sex Doll

But 1m32 is good, not sure whether the casserole has passed customs. I think this is a good choice. No, I’m playing around again, I’m not sure what the customs are. From what I read, size does not pass under control, especially for faces that are too “face”. I hope not to make nonsense, and in the end I do not want to re-initiate the debate, which has to be discussed extensively elsewhere. I like the idea of ​​taking care of the sex doll‘s lover.

The fact that it has to be reheated, its fragility, all those small flaws that make you have to be careful, they actually do a good job. The TPE doll I just received was cold to the touch and very unpleasant. How to make it more pleasant. Did I think of a heating blanket? This is what I think, but what I get is the same 4 days. Actually, it must be warmed up but very, very slowly. How many days will it take to reach a satisfactory temperature?

Bernal - Big Ass Blue Eyes 151CM TPE Love Doll

The heating blanket can be used to prepare and reduce the first method, but the human body’s heat can work completely normally, or simply, it can warm up a few degrees, you are used to it, just mix the two together. The same for forgetful food, but it’s in my pajamas like this pizza, because I have my sex dolls, I made a carrying limit and it bothers me.

Posted on

Use It Sparingly To Clean The Real Sex Doll Area

Don’t ask about colors-these are tattoos done with permanent marks. I am trying to remove them, but some colors cannot be removed. Is it possible to repair such a big damage. When buying a nail polish remover, make sure it is a true acetone, not an environmentally friendly alternative, as it can be used as a nail polish remover, but it cannot clean and remove silicone grease. Use acetone, but keep in mind that it is a solvent, not a strong solvent, but you should use it with care to clean the real sex doll area before using latex.

Now, if you have a smooth hand, my preferred method is to use a low power soldering iron and use the tip of a flat spoon to slip across the area. Do not use a hot air gun. Do not use the heating period. It’s silicone! Is the silicon window frame? The bathtub? ceramic tile? Yes? That’s great! No? It’s easy (through practice). Just apply silicone with a toothpick to fill the gap. Wet your fingers with your tongue (do not do this when sealing the house) and gently slide your fingers along the scratch.

This results in a uniform, smooth surface. On any silicone that has exceeded the desired location, use a small piece of kitchen towel or microfiber cloth with acetone (or 100% iso-alcohol, which is my preferred product). I intend to say the same thing. Looks like layering. I got these on the eve. It looks like it was close to her breasts while Eve. As said, use a small amount on a toothpick. Don’t forget to cross the area with acetone first, otherwise the added silicone real sex dolls won’t stick.

Posted on

Apply Silicone Real Sex Doll Sealant

Please help. So does acetone melt the silicone, then cold weld the scars together, and then wear the sealant? Scars are thinner, so should I use a toothpick before applying acetone? Shouldn’t the sealant be too obvious once it is dry? I also added a photo to the original post. Acetone only cleans silicone and degreases it. But this is necessary before applying silicone real sex doll sealant.

It is difficult to repair such invisible scratches. Make sure to use as little silicone sealant as possible. You can also try using hexane instead of acetone. You can also dilute the silicone gum with hexane to make it softer (this applies to one-component silicone gum; please try before applying it to dolls). Let me guess it is a 100 cm doll from Aliexpress. I encountered the same problem today. I was able to rearrange my 165 cm doll because she did n’t tear. I still want to make a topic on it. If you take a look, it will also help you.

I don’t fix white fever is like charm no, she is 158 years old, and I won’t mention the manufacturer or distributor, because this is not the result of the quality of the doll. Sadly I am responsible for this. It was indeed unhealthy for her to be split too often. However, I’m not so sure about this, and I think using too much petroleum jelly inserts will greatly soften the TPE in this area, causing it to tear and rupture real sex dolls faster, even faster than it is done.

Posted on

Pressure Site Treatment Real Sex Dolls

Depending on the TPE and the manufacturer, I would use a medium temperature of 140 to 170 ° C. (Note: I’m not sure if the display on the soldering station is correct, I always try to set it on the test piece first.) But this time the TPE real sex doll should melt safely, not just on the surface. So, due to the larger surface of the tool, this time I set the temperature to 250 ° C.

The test piece immediately became liquid but did not burn. How bad is the idea of ​​making a paste with some acetone and tpe pieces and smearing it in to try to seal the holes? Stand as if pasted in a paste, then lean a small diameter stone or glass noodle stick against it to secure it in place. Hey, I have a doll and I ordered to go home as soon as possible. I want to know if I should oil the doll or wait for several months when I first get it, and how often do I need to oil it.

I used to have four tpe dolls, but I think some have fueled a lot of people and some are not enough. Is it once a month or once every two months? When I first received her, I thought she was a newcomer. Do I still need oil now? I waited for a month before my initial baby oil treatment on my WM, and after that every 3-4 months. Occasionally, real-life dolls are treated with petroleum jelly for stress areas. Seems good to me.

Posted on

Trim It To The Desired Comfort Sex Dolls

If anyone can answer, I have two questions. One is whether I should avoid certain types of filling (polyester will react with TPE? Cotton). Also, I’m not sure how to seal the sex doll skin once the metal is removed. TPE glue sounds difficult to use, and I’m not sure if I want to risk hot smoke.

Can I stitch it up or pass the thread through the TPE? I eventually removed my leg myself. The mistake I made was that I might be able to fix her, so I cut creases in my hips and legs. In the long run, this is a wrong decision. Attempting to use her as a one-leg torso doll, when I used her, I could feel the metal on her hips.

If you decide to amputate, I suggest you do a little amputation on her thigh and then slide the leg out. The top of the “femur” should be able to slide out easily, leaving a stump which can then be trimmed to the desired comfort. One foot can deflect the body, but it’s much easier to move around. Get good and evil. We hope your sex dolls supplier can serve you.

Posted on

Try Removing TPE Sex Dolls On Your Feet

At some points, mostly where there is a joint, there is a material bonded to the tpe. I am currently trying to remove tpe from the girl’s feet, which is a huge pain and does not cause skin damage on the outside. I cut the tpe sex doll above my ankle and started the removal process. I tried several hip fixations before deciding to fix some parts, but unfortunately it didn’t work.

I feel you are in pain and hope to solve it for you. The mine was not purchased from an approved supplier. I hope that approved vendors can do more for you. In my opinion, limbs that brake during that time indicate poor bone manufacturing. Maybe we should ask for skull photos and finished doll photos from the factory.

In fact, I cut off most of the doll’s legs. Fluffy legs are entangled as hard to carry as heavy legs. I haven’t tried to seal the rest. I was actually trying to remove the TPE sex dolls on my feet without breaking or cutting it. What makes it so painful! I’m glad you were able to get the job you need easier than I am trying.

Posted on

Guarantees Provided By Most Legal Sex Dolls Manufacturers

I started to think that I had to throw away my sex doll because she couldn’t use it for anything. This idea feels like a better option than getting rid of her in just a month. If you are a supplier, please contact your supplier and they should at least contact the factory.

Can I stitch it up or pass the thread through the TPE? I eventually removed my leg myself. The mistake I made was that I might be able to fix her, so I cut creases in my hips and legs. In the long run, this is a wrong decision. Attempting to use her as a one-leg torso doll, when I used her, I could feel the metal on her hips.

If it’s not an external supplier, they may, but you should at least contact them and provide detailed descriptions with photos to help you work for suppliers and factories. If I remember correctly, then most legal sex dolls manufacturers provide little or no guarantees, and the ones I researched & did not provide guarantees on their websites, which made big doll players dissatisfied or even not provided Or without warranty.

Posted on

These Flow Marks Are On The Ass Of The Sex Doll

My mattress is soft foam, so the shape of the butt is not bad, but these flow marks gradually formed on the butt of the sex doll, I want to see from the bed sheet. It’s not the primary eye, but it’s a bit rotten. I tried to put a warm towel on it, wipe it with some baby oil, and then wipe it with powder. A quick note about injecting mineral oil into the breast, if you pull out the needle, it will immediately leak out of the hole.

So I had to leave the needle in and pull the plunger every few hours to fill the syringe. Everything soaked overnight. Her feet are normal because when I think about or design a kimono, I tend to like to play with them. Help me relax. She is still new because it’s just here for a week now … to ship in warm weather After 6 days and being in the truck all day … so I think she may need to recover time … plugged the hole and everything went well in the bath.

The back part has softened a little, obviously also her knees, because this morning I found that the sex dolls had medium-sized tears on their knees, so I would inadvertently do so while sleeping. Unfortunately, I waited until next month to get her accessories, so I hope she can persist long enough to prepare everything for her.

Posted on

Very Simple Repair Sex Dolls

Crossing your back is the best. You don’t want to mess up the front face of the sex doll. The scars may be more messy than you think. You should post a skull picture here so that other TDF members pay 2 cents. Try to simulate what you want to do, take some channels and test them to see how it looks and how easy it is for your ideas to come together.

This is a problem with many of these doll sub-frames … many are outsourced because there are many similarities in design. Some people now make child frames internally. This is the difference between TPE and platinum silicone resin. One is a hot casting process and the other is a cold casting process, so you can avoid the use of PVC metal joints wrapped with foam.

When joints break, this is a very simple fix for sex dolls. However, when using TPE, you may encounter problems if you weld metal fittings to pipes or rods. Then you are working on a whole new set of questions. Here are some good things to fix tpe with a hot air gun, I think if we cut our back for spine repair or replacement, we will steal some tpe from the inside and replace it with foam.