Tag: Treatment

Posted on

Buy From A Reputable Sex Dolls Supplier

After playing with my TPE doll for a full month, when I stood up, my left hip joint broke. I bought it from a reputable sex doll supplier, and I don’t think I did anything to cause undue damage or pressure on that leg, I just had bad luck.

I spent the last two days in funk because it seemed like my doll had become useless. With one foot loosened, I needed almost three hands for the most basic repositioning. I have neither the tools nor the expertise to solve such problems. Even if it can be welded, the legs no longer bend. She can no longer stand up.

Then I realized that if my doll is now permanently trapped on the floor, what effect does the metal skeleton on the leg have? If I cut my leg apart and remove the metal in some way and then put in some sex dolls padding (possibly removed from the pillow) before sealing again, the leg will be at least not awkward whenever she moves . It’s not possible to pose now, so I’m not sure what I will lose by getting the metal out.

Posted on

Guarantees Provided By Most Legal Sex Dolls Manufacturers

I started to think that I had to throw away my sex doll because she couldn’t use it for anything. This idea feels like a better option than getting rid of her in just a month. If you are a supplier, please contact your supplier and they should at least contact the factory.

Can I stitch it up or pass the thread through the TPE? I eventually removed my leg myself. The mistake I made was that I might be able to fix her, so I cut creases in my hips and legs. In the long run, this is a wrong decision. Attempting to use her as a one-leg torso doll, when I used her, I could feel the metal on her hips.

If it’s not an external supplier, they may, but you should at least contact them and provide detailed descriptions with photos to help you work for suppliers and factories. If I remember correctly, then most legal sex dolls manufacturers provide little or no guarantees, and the ones I researched & did not provide guarantees on their websites, which made big doll players dissatisfied or even not provided Or without warranty.

Posted on

These Flow Marks Are On The Ass Of The Sex Doll

My mattress is soft foam, so the shape of the butt is not bad, but these flow marks gradually formed on the butt of the sex doll, I want to see from the bed sheet. It’s not the primary eye, but it’s a bit rotten. I tried to put a warm towel on it, wipe it with some baby oil, and then wipe it with powder. A quick note about injecting mineral oil into the breast, if you pull out the needle, it will immediately leak out of the hole.

So I had to leave the needle in and pull the plunger every few hours to fill the syringe. Everything soaked overnight. Her feet are normal because when I think about or design a kimono, I tend to like to play with them. Help me relax. She is still new because it’s just here for a week now … to ship in warm weather After 6 days and being in the truck all day … so I think she may need to recover time … plugged the hole and everything went well in the bath.

The back part has softened a little, obviously also her knees, because this morning I found that the sex dolls had medium-sized tears on their knees, so I would inadvertently do so while sleeping. Unfortunately, I waited until next month to get her accessories, so I hope she can persist long enough to prepare everything for her.

Posted on

Breasts Look Bigger Sex Dolls

Is that wig a doll? My doll has a lot of wigs, but all of the sex doll‘s wigs are light-colored inside. The inside of artificial wigs is usually black and will stain the doll’s head. I just bought a doll and the same problem occurred with the wig. This is also a very good wig.

Strangely, the entire wig cap was black, but it was simply the elastic belt that caused the problem. I just stopped using the straps and instead used a hair band to secure the wig to her head. It also happened to my doll. I am very sorry to see this. Although I am not that bad, I have encountered similar problems, including one wig.

Time will eliminate most of the discoloration. Usually, you can prevent this contamination by sewing a wig cap inside the wig so that the band does not come in direct contact with the doll, but this is too bad and I will get another wig. Fortunately, I cleaned them again with a detergent. The jet lag of our sex dolls. The breasts in this photo look bigger, but this is just the appearance and the same size.

Posted on

Adhesives Not Recommended For This Repair Real Sex Dolls

But I’m not sure what would I think if the maintenance staff saw a guy in a half-shirt with this when they came to my apartment? For my soldering iron, I chose this based on price and accessories. As someone who doesn’t use a soldering iron, this can easily be caught. If you are working on a TPE real sex doll, use a blade attachment. Sculpting is much easier, and an increase in surface area may make things faster.

But take a moment. I will give up the current course here. A soldering iron has been ineffective at performing this repair. The original repair shown in the previous post was not good enough, and I messed up her armpit. I tried to fill her armpit with the TPE test piece provided by the supplier, and it seemed difficult to make everything work. To me, the pressure in the underarm area is too great.

I tried RLSD’s TPE glue, and although it did play a role, the results for the armpit area were not satisfactory. This was a huge failure and I was reluctant to continue using the existing tools. It can be repaired, but it is not in my support right now. I really don’t want to risk using Loctite glue, or recommend any adhesive not recommended for this repair of real sex dolls.

Posted on

To Make All TPE Real Sex Dolls Flow To The Deepest

I made sure that she was positioned in such a way that I didn’t have to move my arm’s position before waiting for time to heal for at least 24 hours (or longer), and then had time to do more. When I fill my tears, I will do my best to be as cautious and patient as possible. In order to begin to shed tears, I had to open my real sex doll arm a little more. With the tip of a soldering iron, make sure that I melted the debris removed from the neck and gently brushed the inside of the tears so that the debris on the neck could be fully bonded.

I decided to close my arm in most cases so that I could see any anomalies. Indeed, I was able to capture and eliminate foam, which was disturbing because I wanted things to be airtight, but maybe my expectations were too high, and a few hours later, I tested the elasticity of the patchwork. It doesn’t seem to be that strong … as I suspect.

There are simply too many airbags that can’t hold everything together firmly, but I believe it can be solved. I may need to go there again, but I really don’t want to take any TPE from my neck anymore. I don’t even need it, but to make all TPE real sex dolls flow to the deepest to ensure that everything is solid will be very challenging and time consuming. Although not discouraged. I was thinking that I would have to reprocess all the TPE that fell off my neck.

Posted on

I Will Not Try To Overuse Real Sex Dolls Today

When I recovered the excess tpe from the neck of the real sex doll, I cut a pair of skates near the top of the neck tube, so I did not touch the outer area. The challenge now is to get her in a good position to start processing TPE parts because my doll doesn’t have a flat elevated surface to place. Maybe I can put things together. Everything looks good, remember to slow down and keep talking for a few days.

When I first tried it, I was tempted to move on because I could see it running, but it would be best to do it for a while and then leave it for a while, it seemed like a viable approach. Looking again at the tearing of the armpit, I may get enough TPE from my neck, but I need to take it carefully to avoid damaging my neck.

I’ve thought a lot about it, and it’s important not to be hasty. If I did something wrong, please correct me, but I assume that it may be important for TPE real sex dolls to heal for a while, even if your work is not too far away. I won’t try to overuse it today, but at least try to fill the deepest part of my tears. I will update the thread with more pictures as soon as possible.

Posted on

Let You Know My Real Sex Dolls Supplier

It gave me hope. I have been searching for armpit repairs on the real sex doll forum and Google since tears occurred, but the lack of detailed / complete armpit repairs makes me a little nervous. Currently, I am considering the following options: buy test pieces from experienced suppliers, cut into small pieces, and use a soldering iron for reprocessing.

Buying TPE Filler TPE Filler seems to be an easier route, but I want to do as much as possible with her skin tone, which is why I work with my supplier. I do have a suitable respirator, but the work area is not well ventilated. I live in an apartment and going out to the parking lot gets a lot of attention. My work area is my small bathroom, and whenever I do thermal work for girls, I shower in the highest shower cubicle.

The highest temperature at which steam can be combined with toxic particles may be desired. I’m not the sharpest tool in the shed, but when I take a hot shower at work, it always seems to be very different. I know the feeling of breathing toxic vapor, and the consequences are really uncomfortable. I will come back here to let you know what my real sex dolls supplier thinks about ordering test pieces.

Posted on

Use Caution With TPE Sex Dolls Solvents

If the quality is good, then the new sex doll will not be realized in a few weeks, sorry, this is just my personal opinion. I agree with Grimkins’ observation. All of this damage surrounds the play area, which should make you wonder why the type of lubricant used and how to clean it. You should post the lubricants and cleaning products you have been using.

Does the baby chemically react to your lubricants and / or cleaning products? That will be my first question. This is what I think. In my opinion, the lubricant or cleaner you are using is overly dry and / or reacts with TPE. I’ve seen damage like this (deterioration might be a better word), these old dolls have never been oiled or vaselined.

After just a few weeks, the doll will not look like this-makes me wonder if this is a bad TPE blend in the factory, maybe the plasticizer in the blend is insufficient. This is definitely not the result of overuse or forcibly opening the doll hole, I will contact the seller. Regardless of what you do, best wishes, but use TPE sex dolls solvents with caution, as other posters have said that doing so will make the problem worse rather than better.

Posted on

Looks Like TPE Sex Dolls Are Weak

You will need a glass dish to put tpe sex doll pieces in to melt them. Not recommended for any other use at a later time! You will also need a respirator for organic vapors / chemicals. To fill the hole area above the anal entrance hole, I will try to use a small stainless steel spoon inserted into the anal cavity and use it to prevent the filler added to the hole from falling out. It’s like punching holes in the wall with a sieve or grate on the screen.

After bonding the tpe to the surrounding area, you just need to slide the tool out. Does anyone know what I can do? It looks completely dry. TPE glue is actually a solvent and may make the situation worse. How long have you been with her and have you contacted your supplier? I have only spent about 2 weeks now and it is very new.

I’m sending an email to the vendor, but the more information the better. What should we do if tpe dries? And what causes this to happen? What do you use to clean her? Or what lubricant are you using? It just seems to be there, so I think this is something you use there. You can oil her with baby oil. It doesn’t look right. Looks like TPE sex dolls are weak.