Day: February 8, 2020

Posted on

I Am Curious If Anyone Has Tried Sex Dolls

I have put her down and worked for them many times, and made a few mineral oils locally, but they still have not loosened. On another sex doll from the same manufacturer, I was able to release them, soaking between work and applying mineral oil. I was worried about hurting my knees or breaking my hips, so today I ordered a few syringes with needles to try to oil directly, but before I was curious if anyone had tried it.

Has anyone injected the doll with mineral oil at the joints? The syringe is here today, and if someone is going to add something or a link to a topic on that topic, it would be a good time to attract me. Tomorrow is the day of injection, and I would love to have a little knowledge instead of taking the crazy scientist approach like I used to.

I give 0.6 ml to each hip until they stop creaking and then move until they reach the position I want-TPE sex dolls should absorb excess fat. The second one is easier. At that point, I fired a little gun at the joint, then probed down the side, then shot the rest, and coated it.

Posted on

Hope There Are Plastic Sex Dolls Around The Foam

But … as stated elsewhere, these cheap skeleton welds suck, but they are made of hardened steel, so I tried to drill a hole in the sex doll spinal joint for fixation, but on HD I The best drills you can’t buy have found nothing. I tried a hacksaw and a small one with a cutting wheel, but found nothing. Later, I will try to use the new one better, but I worry about the heat generated inside the tube and the TPE damage.

Greater TPE reductions may be required. At the same time, I found that I loved her great flexibility and personal responsiveness, as well as the interesting new poses she can do now. So … I am thinking of terry cloth tucks into the jagged gap to protect TPE and myself and keep it as it is. Then we will reduce some weight and use the right raw materials when closing the wound.

We don’t make tpe sex dolls almost as hot as the mold is poured, so the foam should be good, but I hope there is plastic around the foam so that it will not suck oil from tpe and dry, and the saturated foam will not save A lot of weight. The weld was torn, leaving a weld-sized hole on the top of the inverted U-shaped tube, which was speculated to be 1×2 cm, which caused the tube to become weak and unable to withstand the torque generated by further leg movement. There is a 140 cm thick TPE doll with hip joints that are too tight, and can only swing their legs when flat, and it takes a lot of time to move them.

Posted on

Can You Feel Sex Dolls

Cool picture. Now that you know how it looks, can you feel the sex doll and see if it’s a weld or a bolt? The guess is the weld at the bottom of the spine above the bolt. I have the same problem. His hips froze and tried to flex, breaking his back. I made a 1.5-inch incision in the back and found a break below the back joint. The weld is torn from an inverted U-shaped hip tube.

I would have replaced it with a T-junction made of plumbing fittings, but subsequent movements broke the weaker U-tube at the top. I tried using a thicker wire harness to fix at least the hip joint of the U-shaped tube together, and it worked a little bit, but then the lines started coming out of the tube. I did not use expansion screws. I unplugged the wires instead of piercing myself at a bad moment.

(Guess there is no really good time to pierce yourself). Therefore, I tried to cut off the broken vertices from the U-shaped tube for easy use! / 2-inch water pipe joint, L-type joint and T-type joint instead of spine instead of sex dolls beams. This size fits the tube well, but only for straight parts, so try cutting off the curve.

Posted on

Very Simple Repair Sex Dolls

Crossing your back is the best. You don’t want to mess up the front face of the sex doll. The scars may be more messy than you think. You should post a skull picture here so that other TDF members pay 2 cents. Try to simulate what you want to do, take some channels and test them to see how it looks and how easy it is for your ideas to come together.

This is a problem with many of these doll sub-frames … many are outsourced because there are many similarities in design. Some people now make child frames internally. This is the difference between TPE and platinum silicone resin. One is a hot casting process and the other is a cold casting process, so you can avoid the use of PVC metal joints wrapped with foam.

When joints break, this is a very simple fix for sex dolls. However, when using TPE, you may encounter problems if you weld metal fittings to pipes or rods. Then you are working on a whole new set of questions. Here are some good things to fix tpe with a hot air gun, I think if we cut our back for spine repair or replacement, we will steal some tpe from the inside and replace it with foam.

Posted on

Where An Extra Tpe Sex Dolls Plugin Is Placed

The best option is to make the smallest incision on the back of the sex doll, yes, this will leave scars. But then you can tell people that she had a back surgery. Anyway, go back and make a small incision and see how much can be repaired. Personally, if you are trying to keep an upright TPE heavy, I wouldn’t use multiple strands of wire for repairs because it would bend the wires.

If you do this, you may need to pay more attention to the 2/0 cable. I will cut and add a new joint instead of other joints. This won’t be as easy as a finger repair. This will be a major operation … think twice before proceeding or cutting. It is difficult to provide further advice without really knowing / seeing what we are doing here. Theoretically … it can be done. you can do it.

As suggested by the Department of Health, stay away from electrical wires, etc … Unfortunately, it does not have strength. Also, depending on where it is actually damaged / captured / failed, etc., you must also determine exactly what kind of repair you will be able to make. You might want to put an extra tpe sex dolls plugin in it and practice it, cutting it and melting it back. Make sure there is a temperature setting on the soldering iron so you can set it enough to melt the tpe.

Posted on

Is There Any Way To Solve This Sex Dolls Problem

In a few days, blunt needles may be the number one seller on Amazon, haha. The needle is: “1ml syringe with 23Ga 1.5 inch syringe and plastic needle with cap”. The name is really dazzling. The needle is indeed stainless steel. I always put obstacles between myself. I will not risk long-term contact with any polystyrene materials with TPE sex doll.

As for the wire issue, you will have to open her door to see if it is the pipe or pole skeleton system in use, and determine if it is decided to go this route, it will suit your doll. I received my 6Ye 164D today. She is a beautiful doll, and I have no regrets for the goods I bought.

However, there is some wear and tear on the c-section area out of the box. And I think it could be made worse by putting in a removable vagina. Although this is not a big problem for me, I wonder if there is any way to solve this sex dolls problem? The rest of the body is silky silky, and the crochet area (vagina and hips) is the only part. I apologize for the poor image quality.

Posted on

Want To Reduce The Time That Dyes Penetrate Into Sex Dolls

My 100 cm breasts are a little jerky, so I put 1 ml of nipples directly into a nipple, and I will do it several times throughout the day, maybe we can also rejuvenate them in this way. I had to deal with it, and even after her one-month rotation, she was still bland. My guess is that she was sitting in the warehouse for a long time before I got the sex doll, so I was spinning her every day and rubbing it to try to fix it.

Any ideas or suggestions? She is a doll. The head is everything, except for blue eyes and different hair. Wig linings are usually dark colored wigs. Either use a wig cap that is not black / dark, or choose a better wig.

I had the same problem with my BJD and its vinyl. I always wash my new wig, and if you want to reduce the time that dyes penetrate into sex dolls, you should probably do the same. Don’t be discouraged, just make this a better course for yourself.

Posted on

Breasts Look Bigger Sex Dolls

Is that wig a doll? My doll has a lot of wigs, but all of the sex doll‘s wigs are light-colored inside. The inside of artificial wigs is usually black and will stain the doll’s head. I just bought a doll and the same problem occurred with the wig. This is also a very good wig.

Strangely, the entire wig cap was black, but it was simply the elastic belt that caused the problem. I just stopped using the straps and instead used a hair band to secure the wig to her head. It also happened to my doll. I am very sorry to see this. Although I am not that bad, I have encountered similar problems, including one wig.

Time will eliminate most of the discoloration. Usually, you can prevent this contamination by sewing a wig cap inside the wig so that the band does not come in direct contact with the doll, but this is too bad and I will get another wig. Fortunately, I cleaned them again with a detergent. The jet lag of our sex dolls. The breasts in this photo look bigger, but this is just the appearance and the same size.