Day: February 10, 2020

Posted on

Two Weeks To One Month Warranty Real Sex Dolls

I haven’t tried it yet, so now ID must live with it anyway. Or does the supplier keep its competitors at a higher level? He did find another hawker and sent me a new doll. Is the defect a defect? Neck or ankle? I know that real sex doll are sometimes repaired, but is it too early? My initial thought was that defects are defects, regardless of their severity.

Either way, I will have a better idea that this can be done regardless of whether the vendor handles this issue correctly. If I am wrong, please tell me. I would know that it would be better to handle it properly. Just looking for fairness here. Any comments please be very valuable. What I want to say is that if this is not an independent doll, it is not a big deal.

However, if this is a standing doll with a bad ankle, it will prevent this feature, which is very important! This is a problem, all products on the market, no matter what the product may be, have a one-year manufacturing warranty, and the business you purchased says that the product usually has real sex dolls with a warranty of two weeks to one month, and these Does a doll cost more than $ 1,000, does this seem ethical?

Posted on

I Will Still Have A Scarred Real Sex Dolls

Then I can make any color or design. I really need the forum to comment on this. I have a doll, and in the second week, my new doll lost the left / right movement of the foot … Some of you may have seen this happen, that is, the foot just slipped down. This is WM 160D. This is my second real sex doll.

My first doll was from another vendor. In the first few weeks, it had the same ankle problems and bad neck. Now, the seller I just bought from this doll is very convinced that seller # 1 should replace the doll she made. Now the supplier tells me that the ankle damage is small and will not cause replacement, and the neck damage will cause replacement … and sent me instructions for repairing the ankle.

Now I have only my first doll for a few months, and I am ready for any repairs. I smashed it with TPE glue. A small hole in my finger that I tried to repair eventually melted after putting too much glue. Even if I could repair it, I would still have a scarred real sex doll. Please ask me for as much advice as possible. Tell me the truth. Is this small and won’t cause a return?

Posted on

Looks Like An Inappropriate TPE Real Sex Doll Recipe

Personally, I don’t see how TPE glue can withstand such huge damage. I’m curious if anyone anywhere has ever succeeded in fixing something like a TPE tear. In addition, it almost looks like an inappropriate TPE real sex doll formula that is prone to cracking and failure. When you get the dolls, their eyelashes may stick to the eyeballs, or if you stick new eyelashes, they may glue the eyeballs.

In just a few minutes, your eyes will look like new. Just want to start a new thread, but you are very close to my subject. What effect does “haze” eyes have on the reflections and colors of a photo shoot? The color saturation of my IronTech standard eyes is too high (I will buy MF’s moving eyes later). So does the rough eye surface scatter the reflected light in some way, making the color look darker? Thank you (if you know the answer).

I would rather make them brighter, but dim eyes cast a diffused / blurred light and make the colors look dull. Will it remove glue completely? I have a doll with glue dripping, eyelashes, and eyelids stuck to the eyeballs. I can no longer remove my eyes from the socket. I bought about 8 different real sex dolls eye colors and then I need to make a mold so I can make it myself. It costs about 0.50 sets, compared to $ 5-8 for each set.

Posted on

Rest Between Real Sex Dolls Between Treatments

I hope to hear some information there that can help me. The doll’s arms will raise its head. I only raised her arm, but hugged it tightly in front of her. Will that break the seams? Well, these silicone dolls are in many ways more delicate and fragile than I thought. This is a learning curve. All real sex doll are indeed a learning curve. The good news is that as long as you understand this, there will be no problems.

At first I didn’t even know what it was. When she saw it, she told me and told me how to treat it. My lady has been there for many years and this is not a big deal. She is still here and still looks great. As long as you take care of her, your life will be too long. Now I can believe that they are aerosol sprays on sealants for sealing silicone dolls.

Just as they are applied on pigmented areas such as cosmetics, nipples and labia, a thin top-sealing film is formed. I haven’t found its name, and it hasn’t found its name, maybe an abyss or silicone doll maker might leave our bones here because it’s almost the idea of ​​a similar type of repair on the surface. She doesn’t need heat welding. This weakens the baby’s use of the substance for several days, and uses a tpe glue solvent to apply the glue line from the inside, and then continues the treatment, letting her real sex dolls rest between treatments.

Posted on

How To Fix Such Problems With Real Sex Dolls Article

Do not use heat. Suitable for TPE, not for silicone. Check out my 3-year review of Eve here. And posted a photo very similar to yours. It’s important to do this repair, unfortunately in the future you will have to keep checking if she has more “scratches” and take care of this if it happens. If she doesn’t, her chest may eventually fall. I have to use Eve to solve this real sex doll problem.

About 6 months after I got her, her child showed up. As long as you take care of it and don’t make it worse, it’s not a big deal. If you have further questions, please feel free to contact me. Do not use nail polish remover. Go to the hardware store in the paint area and buy a can of pure acetone. you are right! Those on me are nothing more than scratches, but “delaminated”-2 existing silicone panels spread out at the seams!

It happened after I raised her arm and wore a shirt on her. People warn that there is no one in the UK who can rebuild / repair this split, and I hope someone can heat the weld and rebuild from the inside out. I hope that if she can do that, she will return to normal from the inside out. Almost all internal structures can still be rebuilt / welded together. I have read several real sex dolls articles on how to fix this kind of problem, but I think it needs someone more skilled than me.

Posted on

Use It Sparingly To Clean The Real Sex Doll Area

Don’t ask about colors-these are tattoos done with permanent marks. I am trying to remove them, but some colors cannot be removed. Is it possible to repair such a big damage. When buying a nail polish remover, make sure it is a true acetone, not an environmentally friendly alternative, as it can be used as a nail polish remover, but it cannot clean and remove silicone grease. Use acetone, but keep in mind that it is a solvent, not a strong solvent, but you should use it with care to clean the real sex doll area before using latex.

Now, if you have a smooth hand, my preferred method is to use a low power soldering iron and use the tip of a flat spoon to slip across the area. Do not use a hot air gun. Do not use the heating period. It’s silicone! Is the silicon window frame? The bathtub? ceramic tile? Yes? That’s great! No? It’s easy (through practice). Just apply silicone with a toothpick to fill the gap. Wet your fingers with your tongue (do not do this when sealing the house) and gently slide your fingers along the scratch.

This results in a uniform, smooth surface. On any silicone that has exceeded the desired location, use a small piece of kitchen towel or microfiber cloth with acetone (or 100% iso-alcohol, which is my preferred product). I intend to say the same thing. Looks like layering. I got these on the eve. It looks like it was close to her breasts while Eve. As said, use a small amount on a toothpick. Don’t forget to cross the area with acetone first, otherwise the added silicone real sex dolls won’t stick.

Posted on

Obvious Error Caused A Big Bug In Real Sex Dolls

I have been saying recently that he will provide repair services, and I think this particular job will be something he can solve. I know he is moving now, but it doesn’t hurt to send him an email through the website, or you can send a message through the forum, good luck! I want to share my question here because this is a good real sex doll topic.

I accidentally cut her ass, and then I did spread her legs too much, too many times, and she was heated. Those obvious mistakes created a big loophole (don’t ask about colors-these are tattoos done with permanent marks. I’m trying to remove them, but some colors can’t be removed). Is it possible to fix such a big damage? I was thinking: prepare some plates with hot TPE and pour into the holes (similar to a cup of hot milk).

There are new holes in my solid quality. Use some vaginal / butt sex toys and paste them in the holes. Same as above, but I will join again with hot TPE. I want to share my question here because this is a good topic. I accidentally cut her ass, and then I did spread her legs too much, too many times, and she was heated. Those obvious mistakes caused a big hole in real sex dolls.

Posted on

Apply Silicone Real Sex Doll Sealant

Please help. So does acetone melt the silicone, then cold weld the scars together, and then wear the sealant? Scars are thinner, so should I use a toothpick before applying acetone? Shouldn’t the sealant be too obvious once it is dry? I also added a photo to the original post. Acetone only cleans silicone and degreases it. But this is necessary before applying silicone real sex doll sealant.

It is difficult to repair such invisible scratches. Make sure to use as little silicone sealant as possible. You can also try using hexane instead of acetone. You can also dilute the silicone gum with hexane to make it softer (this applies to one-component silicone gum; please try before applying it to dolls). Let me guess it is a 100 cm doll from Aliexpress. I encountered the same problem today. I was able to rearrange my 165 cm doll because she did n’t tear. I still want to make a topic on it. If you take a look, it will also help you.

I don’t fix white fever is like charm no, she is 158 years old, and I won’t mention the manufacturer or distributor, because this is not the result of the quality of the doll. Sadly I am responsible for this. It was indeed unhealthy for her to be split too often. However, I’m not so sure about this, and I think using too much petroleum jelly inserts will greatly soften the TPE in this area, causing it to tear and rupture real sex dolls faster, even faster than it is done.

Posted on

Usage And How Often You Bend Real Sex Dolls

Owned her since October 2017. As soft as her arrival, without any damage. I think they do stain easily, so either don’t wear any dark clothes on them or wash them off. Wash and dust the doll the first time you get it … grease for at least 3 to 4 months. Depending on your usage and how often you bend the real sex doll, it will determine your cleaning, oiling and powdering cycle.

This is one thing that is different for everyone. Keep in mind that most dolls deflate a little bit, which means that the oil will seep into the doll’s surface for a while, which means you may find very light oil spots on her or her linen clothes, which Is normal. Another thing is that you don’t wear dark clothes until you have washed the doll several times to get the mold out of the material.

If you do decide to dress the doll in dark clothes, it is best to just let her wear this color for about 6 to 8 hours, and then dress her with light clothes. Does anyone know how to remove the tiny scratches on the silicone skin? After a period of dress up, a scratch appeared on the shoulder of my brand new Sanhui silicone doll. Very noticeable after powdering. Guess there must be some common real sex dolls remedies for these things? She is too new.

Posted on

Pressure Site Treatment Real Sex Dolls

Depending on the TPE and the manufacturer, I would use a medium temperature of 140 to 170 ° C. (Note: I’m not sure if the display on the soldering station is correct, I always try to set it on the test piece first.) But this time the TPE real sex doll should melt safely, not just on the surface. So, due to the larger surface of the tool, this time I set the temperature to 250 ° C.

The test piece immediately became liquid but did not burn. How bad is the idea of ​​making a paste with some acetone and tpe pieces and smearing it in to try to seal the holes? Stand as if pasted in a paste, then lean a small diameter stone or glass noodle stick against it to secure it in place. Hey, I have a doll and I ordered to go home as soon as possible. I want to know if I should oil the doll or wait for several months when I first get it, and how often do I need to oil it.

I used to have four tpe dolls, but I think some have fueled a lot of people and some are not enough. Is it once a month or once every two months? When I first received her, I thought she was a newcomer. Do I still need oil now? I waited for a month before my initial baby oil treatment on my WM, and after that every 3-4 months. Occasionally, real-life dolls are treated with petroleum jelly for stress areas. Seems good to me.