Day: February 8, 2020

Posted on

Figure Out How To Heat Seal Sex Dolls

Any ideas that would help your question, but be sure to know how you would manage to seal it up (end result) … consider maybe one day (along the seams) to raise my own girl’s leg up, but mainly It’s “frightened” It’s hard to get back to the right state again. Thinking about stuffing and stitching almost makes me feel like I’m dealing with stuffing sex doll. I don’t care if my doll comes out of here, there is a nasty body Scars and fluffy legs.

I just can’t use her one leg to be heavy and loose. If I could lose weight, but she still had leg-like things at her tail, I would call it victory. For her, losing weight will not be the worst thing in the world. I cut my foot from the sole of the foot, moved it up, and managed to remove the bone. The broken part was at the weld before the hip joint, so once I cut the tape, it slipped out.

In addition to wounds on the soles of the feet and seams, TPE skin is also okay. I was able to cut the tape on my feet and knees without poking outside. Now, I just need to fill something inside to keep its shape, or tie a ribbon around it to keep the legs closed, or figure out how to heat-sex sex dolls. Still, I’m happy that at least heavy metals can be removed.

Posted on

Trim It To The Desired Comfort Sex Dolls

If anyone can answer, I have two questions. One is whether I should avoid certain types of filling (polyester will react with TPE? Cotton). Also, I’m not sure how to seal the sex doll skin once the metal is removed. TPE glue sounds difficult to use, and I’m not sure if I want to risk hot smoke.

Can I stitch it up or pass the thread through the TPE? I eventually removed my leg myself. The mistake I made was that I might be able to fix her, so I cut creases in my hips and legs. In the long run, this is a wrong decision. Attempting to use her as a one-leg torso doll, when I used her, I could feel the metal on her hips.

If you decide to amputate, I suggest you do a little amputation on her thigh and then slide the leg out. The top of the “femur” should be able to slide out easily, leaving a stump which can then be trimmed to the desired comfort. One foot can deflect the body, but it’s much easier to move around. Get good and evil. We hope your sex dolls supplier can serve you.

Posted on

At Least I Can Pick Up Sex Dolls Again

To answer your other questions, it is not difficult to remove the TPE sex doll from the skeleton. The bottom of the foot was most damaged because I needed to cut it open to remove standing foot metal, but for the rest of the leg, this was just a progressive cut along the seam. Once I cut the tape at the knee joint, peeled it off and cut the TPE from the drill bit stuck to the metal until it was completely separated, it was simple.

I would open the hips and tie the metal back with a metal zipper to keep her legs soft but still workable. I just sealed it up and used the video on YouTube-using heatgun and metal pieces .. feasible and sure. Thanks for the information you provided, I haven’t realized that there will be tape and TPE / metal bonding to make it so difficult.

However, if my supplier cannot fix the replacement body, I might try to see if it is possible to cut the TPE around the tape / metal without puncturing the surface. Even if it causes external damage, it is better than a completely loose leg. I think in this regard, even a complete amputation of the leg is better than my current situation. I have to make sure that no water comes in from the open stump, but at least I can pick up sex dolls again.

Posted on

Try Removing TPE Sex Dolls On Your Feet

At some points, mostly where there is a joint, there is a material bonded to the tpe. I am currently trying to remove tpe from the girl’s feet, which is a huge pain and does not cause skin damage on the outside. I cut the tpe sex doll above my ankle and started the removal process. I tried several hip fixations before deciding to fix some parts, but unfortunately it didn’t work.

I feel you are in pain and hope to solve it for you. The mine was not purchased from an approved supplier. I hope that approved vendors can do more for you. In my opinion, limbs that brake during that time indicate poor bone manufacturing. Maybe we should ask for skull photos and finished doll photos from the factory.

In fact, I cut off most of the doll’s legs. Fluffy legs are entangled as hard to carry as heavy legs. I haven’t tried to seal the rest. I was actually trying to remove the TPE sex dolls on my feet without breaking or cutting it. What makes it so painful! I’m glad you were able to get the job you need easier than I am trying.

Posted on

Some Parts Are Easily Exposed To Sex Dolls Metal

I’m afraid there will still be something missing that will prevent it from working, so I think I should ask more knowledge experts. Is it feasible / a good idea to remove the metal skeleton from a hip fractured leg? I’ve contacted my sex doll vendor and I’m waiting to fix this, but I didn’t expect anything. In the meantime, I have been brainstorming about bone removal. It is difficult to remove bones like the legs.

It is absolutely difficult to bond TPE to metal and then remove it from the metal. I have done this many times, but this is to separate the doll from the torso, but I know that the legs are usually impossible and the toes are simply impossible without destroying the doll. I have tried welding joints but there is no solution because the oil has contaminated the metal and flux cored welding does not last very long.

I am afraid that these broken parts are actually ends and cannot be completed. After 7 weeks of use, I had the same experience on dolls. About the inability to remove the skeletal leg is absolutely correct. At least on my doll, some parts can easily expose the sex dolls metal, leading people to think you can slide the metal out. Unfortunately, this is not the case.

Posted on

Buy From A Reputable Sex Dolls Supplier

After playing with my TPE doll for a full month, when I stood up, my left hip joint broke. I bought it from a reputable sex doll supplier, and I don’t think I did anything to cause undue damage or pressure on that leg, I just had bad luck.

I spent the last two days in funk because it seemed like my doll had become useless. With one foot loosened, I needed almost three hands for the most basic repositioning. I have neither the tools nor the expertise to solve such problems. Even if it can be welded, the legs no longer bend. She can no longer stand up.

Then I realized that if my doll is now permanently trapped on the floor, what effect does the metal skeleton on the leg have? If I cut my leg apart and remove the metal in some way and then put in some sex dolls padding (possibly removed from the pillow) before sealing again, the leg will be at least not awkward whenever she moves . It’s not possible to pose now, so I’m not sure what I will lose by getting the metal out.

Posted on

Guarantees Provided By Most Legal Sex Dolls Manufacturers

I started to think that I had to throw away my sex doll because she couldn’t use it for anything. This idea feels like a better option than getting rid of her in just a month. If you are a supplier, please contact your supplier and they should at least contact the factory.

Can I stitch it up or pass the thread through the TPE? I eventually removed my leg myself. The mistake I made was that I might be able to fix her, so I cut creases in my hips and legs. In the long run, this is a wrong decision. Attempting to use her as a one-leg torso doll, when I used her, I could feel the metal on her hips.

If it’s not an external supplier, they may, but you should at least contact them and provide detailed descriptions with photos to help you work for suppliers and factories. If I remember correctly, then most legal sex dolls manufacturers provide little or no guarantees, and the ones I researched & did not provide guarantees on their websites, which made big doll players dissatisfied or even not provided Or without warranty.

Posted on

These Flow Marks Are On The Ass Of The Sex Doll

My mattress is soft foam, so the shape of the butt is not bad, but these flow marks gradually formed on the butt of the sex doll, I want to see from the bed sheet. It’s not the primary eye, but it’s a bit rotten. I tried to put a warm towel on it, wipe it with some baby oil, and then wipe it with powder. A quick note about injecting mineral oil into the breast, if you pull out the needle, it will immediately leak out of the hole.

So I had to leave the needle in and pull the plunger every few hours to fill the syringe. Everything soaked overnight. Her feet are normal because when I think about or design a kimono, I tend to like to play with them. Help me relax. She is still new because it’s just here for a week now … to ship in warm weather After 6 days and being in the truck all day … so I think she may need to recover time … plugged the hole and everything went well in the bath.

The back part has softened a little, obviously also her knees, because this morning I found that the sex dolls had medium-sized tears on their knees, so I would inadvertently do so while sleeping. Unfortunately, I waited until next month to get her accessories, so I hope she can persist long enough to prepare everything for her.

Posted on

If Left For A Long Time Sex Dolls

Not sure how it works in real life, but it’s worth a try. She also got these creases. I usually rotate the position, lying on her back flat, lying on her abdomen (usually not too long, but it is best to touch the back and hips of the sex doll), the posture of the fetus (I make sure not to put heavy weight on the elbows And with one leg straight to balance her), then sit on a chair (this will make the blanket / sheets less likely to wrinkle under her).

I also put her on a blanket and found it helpful, but she would still wrinkle if left for a long time. The good news is that after two years with her, the creases always disappear to me. Sometimes it takes a few days. Similarly, it may be important to rotate her around every other day. From sleeping on one side to sleeping on one side in a fetal position, and then to the other side. If she’s in bed for more than a few days, that’s what I have to do.

Of course, there is a long line beside me to sleep here. So no one will feel too comfortable! Today, I am going to inject another 1 ml and call it good, and then try to inject 4 ml into the left breast. Then refill the hips. I didn’t stand up, so my doll has been lying on the mouths of sex dolls for the past two weeks.

Posted on

Make It Sized To Cover The Body Of The Sex Doll

So far, everything feels very successful, and if I try, I can’t find any injection sight. Once the joint is about to perform work, I will report to the thread in a few days. The buttocks of the bubbles are a little stiff this morning, although they have improved a lot, so I will inject them again. You can take the blanket that came with her and fold it up to make it fit to cover the width of the sex doll‘s body, and then place it on the bed sheet.

This way, it creates a Cushing / double-layer barrier between her and the sheets. (Microfiber blankets don’t show drastic creases when they are wrinkled. Microfibers help a bit to “spread” the creases that happened. Yesterday, I put 3 Milliliter of oil, it feels significantly softer today! Although powdery, it is still shiny, and this photo shows the difference.

They appear over time, but they get more each time you wrinkle her. If your doll comes with a soft blanket, place it on the bed when you store it and they should disappear. I like the idea, maybe using any thicker soft blanket. Then you don’t have to drag the sex dolls along the sheets, you can just pull the blanket and slide her.