Have You Given Up On This Real Sex Dolls Project

I can’t navigate the repair kit without errors, so I assume it’s out of stock. Any further suggestions are appreciated. I am going to throw away the towel. Today, I’ve done some welding work on her armpits, but the results did not excite me. I closed her armpit as much as possible to reduce the pressure, then pushed the iron into her armpit and started sliding the needle tip left and right to melt the TPE real sex doll.

After waiting for about an hour, and the latest article I published in the thread, I went back to the room to look at her armpit again, and it actually looked more promising than any photos shared in the thread. All I need to do now is make sure the tip is deep enough to avoid getting the effect of Swiss cheese.

I don’t know if you have given up all hope for this real sex dolls project, but maybe you can try to change your technology and add some tools to help you get better results? Read it carefully, and it seems that you can complete all the published tasks with only a soldering iron blade! ? Great, I want to say you can only do so much with one tool! If you are not satisfied, try fewer Swiss cheeses.

Adhesives Not Recommended For This Repair Real Sex Dolls

But I’m not sure what would I think if the maintenance staff saw a guy in a half-shirt with this when they came to my apartment? For my soldering iron, I chose this based on price and accessories. As someone who doesn’t use a soldering iron, this can easily be caught. If you are working on a TPE real sex doll, use a blade attachment. Sculpting is much easier, and an increase in surface area may make things faster.

But take a moment. I will give up the current course here. A soldering iron has been ineffective at performing this repair. The original repair shown in the previous post was not good enough, and I messed up her armpit. I tried to fill her armpit with the TPE test piece provided by the supplier, and it seemed difficult to make everything work. To me, the pressure in the underarm area is too great.

I tried RLSD’s TPE glue, and although it did play a role, the results for the armpit area were not satisfactory. This was a huge failure and I was reluctant to continue using the existing tools. It can be repaired, but it is not in my support right now. I really don’t want to risk using Loctite glue, or recommend any adhesive not recommended for this repair of real sex dolls.

I’m Not Sure About Contacting TPE Real Sex Dolls

But it seems that it has been waiting for at least a week since the first repairs were made to cure the TPE and become more resilient, as mentioned earlier. I will not do any other work until I get this test piece, but at the same time, I will post some links and information to show you exactly what I am using for this repair real sex doll. Even with a respirator that only filters organic vapors, I still feel the consequences of inhaling toxic TPE fumes.

The effects of the smoke on me were short-term memory loss, difficulty breathing, difficulty falling asleep and redness in my throat. After working with tears in a poorly ventilated area for about 40-50 minutes, it lasts about a week and a half. I live in an apartment, so there is no well-ventilated place. I did this in the bathroom with the exhaust fan turned on, then ran the shower, hoping to bind the TPE particles to the steam.

If you, like me, don’t have a well-ventilated work space, buy this mask for repair. As of now, this gas mask is priced at $ 31 on Amazon. I am not sure what the long-term effects of exposure to TPE real sex dolls smoke are, but the short-term effects are enough to make me uncomfortable at work. Honestly, the mask itself looks great.

Waiting For TPE Real Sex Dolls From The Supplier

Still waiting for feedback from suppliers of TPE test pieces. I think you handled it well! Be patient, it looks much better than originally thought! I’ve been waiting for a week for the TPE to cure, and it seems to be better than it was a few days ago. I also contact the vendors who are testing TPE, so I still have to wait for some time to finish the real sex doll job. This is an impressive job.

Before that, I had to deal with a tear in the armpit, and all I used was, but all you had to do was a plastic surgeon. You can hardly tell from the last picture! Can’t wait to see the work done. Either way, I believe that others will find this feature useful, and seeing how you do it, it seems impossible, I really appreciate it!

I do n’t have experience with a soldering iron, so doing this work is quite daunting, especially when trying to use a hot air gun in advance will make the situation 5 times worse. I just make sure to search these forums to fix high stress areas. I haven’t been able to do any tearing work for about two weeks, and I’m still waiting to get a TPE real sex dolls test piece from the vendor.

To Make All TPE Real Sex Dolls Flow To The Deepest

I made sure that she was positioned in such a way that I didn’t have to move my arm’s position before waiting for time to heal for at least 24 hours (or longer), and then had time to do more. When I fill my tears, I will do my best to be as cautious and patient as possible. In order to begin to shed tears, I had to open my real sex doll arm a little more. With the tip of a soldering iron, make sure that I melted the debris removed from the neck and gently brushed the inside of the tears so that the debris on the neck could be fully bonded.

I decided to close my arm in most cases so that I could see any anomalies. Indeed, I was able to capture and eliminate foam, which was disturbing because I wanted things to be airtight, but maybe my expectations were too high, and a few hours later, I tested the elasticity of the patchwork. It doesn’t seem to be that strong … as I suspect.

There are simply too many airbags that can’t hold everything together firmly, but I believe it can be solved. I may need to go there again, but I really don’t want to take any TPE from my neck anymore. I don’t even need it, but to make all TPE real sex dolls flow to the deepest to ensure that everything is solid will be very challenging and time consuming. Although not discouraged. I was thinking that I would have to reprocess all the TPE that fell off my neck.

I Will Not Try To Overuse Real Sex Dolls Today

When I recovered the excess tpe from the neck of the real sex doll, I cut a pair of skates near the top of the neck tube, so I did not touch the outer area. The challenge now is to get her in a good position to start processing TPE parts because my doll doesn’t have a flat elevated surface to place. Maybe I can put things together. Everything looks good, remember to slow down and keep talking for a few days.

When I first tried it, I was tempted to move on because I could see it running, but it would be best to do it for a while and then leave it for a while, it seemed like a viable approach. Looking again at the tearing of the armpit, I may get enough TPE from my neck, but I need to take it carefully to avoid damaging my neck.

I’ve thought a lot about it, and it’s important not to be hasty. If I did something wrong, please correct me, but I assume that it may be important for TPE real sex dolls to heal for a while, even if your work is not too far away. I won’t try to overuse it today, but at least try to fill the deepest part of my tears. I will update the thread with more pictures as soon as possible.

Might Be Better For Larger Real Sex Dolls Areac

And I will avoid using hot air guns, because I am not sure it will not work even in the final smoothing. A larger flat tool (such as a heated spoon) may help smooth the area, but in the end it has nothing to do with appearance, but functionality and repair are crucial so it doesn’t get worse. I also have a real sex doll that needs repair-just like your arm.

But the degree of tearing is small, I will fix my problem this way, and I will get a repair video. I can’t believe this will attract your attention and Arthur’s attention! Here I did receive a test piece from Tan WM, which started to restore my confidence and I have been practicing the test piece in a “well-ventilated work area”. I’m using a knife tip and it takes some time to smooth it, so I know it will take a lot of time.

If the size of the attachment is three times the original, it may be better for larger real sex dolls areas, but I am willing to do this for a long time. I know it’s easy to smooth it with my hot air gun, but since everyone says the hot air gun is a bad idea, smoothing it will be a bigger task. It doesn’t seem impossible, it’s just tedious.

Will Take Up A Lot Of Spare TPE Real Sex Dolls

I personally will avoid using tpe real sex doll padding. Don’t get me wrong, because it’s a convenient thing, and I’ve used it successfully before, but I think it’s best for areas that don’t stretch often. It also actively melts the surrounding tpe, so some skills are required to successfully use it. The solution I have to solve is to place her in the best position so that her armpits are facing up and then close her arms as much as possible.

However, it was still allowed to enter the axilla and gradually divided into small pieces using a variable welding station. You can always cut some pieces from the neck and that’s what I do when I do a groin repair. No matter what you decide, I wish you good luck! Soldering station is a good solution. Depending on the factors, the hot air gun will open her more / worse things, but I will first cut a small piece of TPE and then gradually fill it into the larger TPE by welding.

Yours can be repaired, but it will take up a lot of spare TPE real sex dolls, I will take it from the insert or her neck, or just order some spares. I’ll do the repairs like a few days, so you should take your time-do it every time, then take a break and continue. The final mixing will be performed using a solder gun.

Let You Know My Real Sex Dolls Supplier

It gave me hope. I have been searching for armpit repairs on the real sex doll forum and Google since tears occurred, but the lack of detailed / complete armpit repairs makes me a little nervous. Currently, I am considering the following options: buy test pieces from experienced suppliers, cut into small pieces, and use a soldering iron for reprocessing.

Buying TPE Filler TPE Filler seems to be an easier route, but I want to do as much as possible with her skin tone, which is why I work with my supplier. I do have a suitable respirator, but the work area is not well ventilated. I live in an apartment and going out to the parking lot gets a lot of attention. My work area is my small bathroom, and whenever I do thermal work for girls, I shower in the highest shower cubicle.

The highest temperature at which steam can be combined with toxic particles may be desired. I’m not the sharpest tool in the shed, but when I take a hot shower at work, it always seems to be very different. I know the feeling of breathing toxic vapor, and the consequences are really uncomfortable. I will come back here to let you know what my real sex dolls supplier thinks about ordering test pieces.

Your Repair Of Damaged Areas Real Sex Dolls

I know how you feel about doing the same thing a year ago, although the damage I caused was much more serious because I mistakenly heated and flattened my little groin tears and made it worse by using tpe filler The area of ​​a real sex doll. The good news is that I believe that this kind of damage can be repaired using the methods detailed in Mishka’s tpe repair thread.

For best results, I suggest you use a variable thermal welding station (buy my mine from eBay for £ 20) and then practice the technique used by Mishka, which works with small pieces of tpe as you gradually Work it into the damaged area and build a layer of tpe. If you look at this link, this is my personal experience.

I didn’t forget to make sure you do any such work in a well-ventilated place, and you will need proper masks to reach toxic fumes (3 million euros are affordable and available from many eBay sellers). Hope this helps and good luck! I’ve seen your thread several times, and the fixes you made to real sex dolls are not very noteworthy.