Month: February 2020

Posted on

Until We Find The Solution Real Sex Dolls

It’s a pity that only 2 weeks after taking it, she had so much tears under her armpit. Well, until I picked up the heat gun, it wasn’t that big (I shouldn’t do it …), now it’s almost as deep as the bone joints. I don’t need to worry about the tears in the armpits. I have owned another WM real sex doll for two years.

As if they changed the TPE mix, it was so ridiculous and less flexible than my first. I should know that using a hot air gun on one of the areas that may withstand the highest pressure is a bad idea, but I won’t give up. Here is what I have on hand: 1. Hot air gun (with infrared thermometer) 2. Cheap electric soldering iron set (with some accessories) 3. Available credit: | I am not a newbie, but this accident made me Be confident that you are a newbie.

By the way, I want to store real sesx dolls in my room all the way to the lower arm (for obvious reasons) until we find a solution. I don’t want to be one of those guys who sound desperate, but I really want to be transparent, even if this process takes me weeks to complete.

Posted on

Help You Add Stuff Tpe Sex Dolls

As others have mentioned, it is likely that the batch of tpe used on the sex doll has lost some of its ingredients and may cause premature aging. But I think you will notice that other areas, such as the armpits behind the knees, are also worn out. It seems to be limited to private use, so it reminds me that the chemicals you use to clean up are the culprits.

Vaseline / mineral oil itself is a poor promoter of bacterial growth, so just mixing light soap in water immediately after use and washing it occasionally is enough to prevent the risk of mold. I think people will continue to read the horror stories here, seeing past topics, freaking out, and then sometimes getting tidy. Just be thorough, but not necessarily heavy on the use of chemicals and hot water.

Just to give you some ideas on where to start fixing the work that has been done. You need to get a sample / spare tpe from the piper doll manufacturer, apparently having the same skin tone. You want to use tools. Therefore, as Arthur mentioned, it is a hot air rework station. I will also get a stainless steel sculpting kit like this to help you add filler tpe sex dolls and smooth the area.

Posted on

Add And Smooth Proficient Repairs Of TPE Sex Dolls

All in all, if I use Vaseline in small amounts, the TPE sex doll will heal over time, can I use TPE glue to repair the tear? Or am I forced to take the hot air gun route for repair? I can only speak and read English, but I think this is a bastard, and if I correctly guess the label, the label on the apricot may be more sour. I think most rinsing products are acidic and may erode TPE.

Women’s Health.gov quotes Most doctors advise women not to rinse. Exudation can change the necessary balance between vaginal flora (bacteria living in the vagina) and natural acidity in a healthy vagina. A healthy vagina has good and harmful bacteria. Bacterial balance helps maintain an acidic environment. I don’t think any application of anything will offset this damage.

Other than the skilled repair of adding and smoothing TPE sex dolls like a factory, I think this is hard to fix and maybe stabilizing it is the best option you want. Unfortunately, the damage has already been done. If you do not disturb you, you will need to perform repairs there or only repairs will be accepted. But move on and I will change your cleaning routine.

Posted on

I Always Wash Sex Dolls After Use

I notice that TPE sex doll often contain a certain amount of oil, and I want to make the doll’s skin flexible … Do you think any of your cleaning habits might use these possible results? Given its current fragility, I would not use baby oil in the area. Baby oil may make the area excessively soft, making it worse. I use vaseline there. And only a small amount is needed to wet the area.

Enough to make the surface look moist. Do not wipe on it. Given the current state of tpe, I would not use Nivea cream either. It contains water. TPE pouring out and already in a fragile state can cause mold. The strain zone (which looks like a cooked turkey) has more gaps for bacteria to enter.

And there is not enough oil in the pores; the water in Nivea Cream can be used by any remaining bacteria to make mold. Seen another doll owner using it on this forum, so I think it should be fine. I’m really not sure what the reason is because I always wash the entire body of sex dolls after use, but only the damage in that particular area … So far, my best guess is that if too much, baby powder Can the material be dried?

Posted on

Suggestions For More Experienced Sex Dolls Users

People with some experience can certainly do this, but if you haven’t used tpe sex doll at all, it definitely isn’t. Due to toxic fumes, etc., precautions must also be taken. I’m a newbie, so please think twice. I have never experienced this look on a doll before, but I want to know … When you clean the doll’s private area, do you use boiling water?

I remember mentioning in a tutorial that TPE can melt or slightly liquefy at 200 degrees Celsius … if you use boiling water above that temperature to clean private areas and then let it air dry, it may be really fast to heat and Cooling may be the cause of structural cracking.

Once again, you got more experienced sex dolls user suggestions before me, I just made a guess based on what I saw that looks like too dry, which may be caused by high temperature or rapid evaporation and material deterioration . Another thing to note-dishwashing soap (I know you only mentioned “mild soap”, so I’m not sure) and similar soaps tend to be “oil solvents” when mixed with water. This is the main idea used when washing dishes with a lot of grease or oil.

Posted on

I Will Be In Some Spare Tpe Sex Dolls

Lubricants and suds should be suspicious. Use baby oil to clean and maintain the correct condition. The soap will remove the oil and will quickly destroy her. These piper sex doll are fragile and need to cheer on privately. I agree that it is too early, but it seems to enjoy a high reputation, and I am very convinced that the problem lies in my daily maintenance.

I had previously sent an email to Kimi and he contacted the manufacturer and they suggested that I use a hot air gun to melt the rough surface of the TPE and stop using the existing soap. I’m not sure if I want to try this, I worry that I will eventually hurt her further because the damage is also inside the orifice. At the same time, I completely stop moving her to prevent further tearing.

Take a quick look, if you are sure you want to use hot air to reach the area, then I will not use a hot air gun, but instead use a variable hot hot air rework station with a thin nozzle. Even then, I am cautious because the area deforms under a certain amount of tension and it is easy to open when hot air is applied. Personally, I will do some exercises on some spare tpe sex dolls until you are proficient in the method.

Posted on

Use Caution With TPE Sex Dolls Solvents

If the quality is good, then the new sex doll will not be realized in a few weeks, sorry, this is just my personal opinion. I agree with Grimkins’ observation. All of this damage surrounds the play area, which should make you wonder why the type of lubricant used and how to clean it. You should post the lubricants and cleaning products you have been using.

Does the baby chemically react to your lubricants and / or cleaning products? That will be my first question. This is what I think. In my opinion, the lubricant or cleaner you are using is overly dry and / or reacts with TPE. I’ve seen damage like this (deterioration might be a better word), these old dolls have never been oiled or vaselined.

After just a few weeks, the doll will not look like this-makes me wonder if this is a bad TPE blend in the factory, maybe the plasticizer in the blend is insufficient. This is definitely not the result of overuse or forcibly opening the doll hole, I will contact the seller. Regardless of what you do, best wishes, but use TPE sex dolls solvents with caution, as other posters have said that doing so will make the problem worse rather than better.

Posted on

Looks Like TPE Sex Dolls Are Weak

You will need a glass dish to put tpe sex doll pieces in to melt them. Not recommended for any other use at a later time! You will also need a respirator for organic vapors / chemicals. To fill the hole area above the anal entrance hole, I will try to use a small stainless steel spoon inserted into the anal cavity and use it to prevent the filler added to the hole from falling out. It’s like punching holes in the wall with a sieve or grate on the screen.

After bonding the tpe to the surrounding area, you just need to slide the tool out. Does anyone know what I can do? It looks completely dry. TPE glue is actually a solvent and may make the situation worse. How long have you been with her and have you contacted your supplier? I have only spent about 2 weeks now and it is very new.

I’m sending an email to the vendor, but the more information the better. What should we do if tpe dries? And what causes this to happen? What do you use to clean her? Or what lubricant are you using? It just seems to be there, so I think this is something you use there. You can oil her with baby oil. It doesn’t look right. Looks like TPE sex dolls are weak.

Posted on

A Little Baby Oil To Clean My Sex Dolls Head

This was my first sex doll, so I realized that I would end up damaging her with not enough / too much maintenance, but it came too early and I am very anxious now. Today I noticed some strange marks around and in the hole. I don’t know what caused it or how to fix it. I think this will make the material more fragile because it is a bit broken now and I ordered some tpe glue and at the same time I want to learn more about what is happening here. I follow the classic tpe care: 1/5 Mild soap + water, dry with light pressure with microfiber tools, baby powder.

Also, be careful not to touch anything else. Wash your hands after application and dry on a towel. The next day, the towel was greatly bleached. That peroxide is powerful! guard against! There is no need for baby oil to clean the head unless you are skilled at redoing cosmetics, as essential oils remove the cosmetics used in the factory.

I only use a little baby oil on my cotton swabs to clean my sex dolls’ heads. Please be careful to avoid makeup that I want to keep and use it after a few months. When your girl arrives, be sure to clean your body, but your head should be fine. I should add that instead of having your doll go to the bath, you have to wash her with a sponge.

The risk of water entering undesired areas is too great. I put a few towels on the bed, and Jenny lay on it, then washed it gently. Hannah Doll is irresistibly beautiful-refresh my memory of her “brand and model”. Hadley has been looking for a wing girl at Christmas, and I think she became curious, because every time she saw this doll, her model fancied wrong.

Posted on

I Recently Bought Sex Dolls

Its diameter is about 1 to 2 mm and its depth is about 1 mm. There are many hands. Is there anything else I can do to prevent this? It’s weird, can you post pictures? Has she been exposed to any chemicals? The TPE repair thread discusses the use of heat to soften the TPE sex doll. This method may be better for chemical repairs, or it can be ignored if not too scary.

I patched the hole on her wrist with a hot air gun, but the fingers of the hot air gun were difficult to use, because it would melt more easily if not careful. That was dissolved by a chemical, just like my acetone experiment. You can steal some TPE from your neck like me and dissolve it in acetone to make a filler, but experiment first on a hidden spot or another TPE.

My method is to gently wipe the affected area with a soft cloth dipped in white alcohol, and then dry it overnight. This is a very good idea, and maybe a solvent can be applied with a makeup sponge or Q-tip. It is best to test in the neck first. I recently purchased sex dolls and it is in the best condition from the order. The company’s customer service quality is impeccable (thanks again!) And the delivery time is very fast (3 weeks).